Tag: M.W=0-100

Reference of 930-36-9,Some common heterocyclic compound, 930-36-9, name is 1-Methylpyrazole, molecular formula is C4H6N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

S1, under nitrogen atmosphere protection,100g of 1-methylpyrazole was added to 2L of tetrahydrofuran, stirred to dissolve to uniform state,Then cooled to minus 60 degrees,Then 2.5M concentration of n-butyllithium 600ml,Insulation below minus 60 degrees Celsius,After the addition of n-butyl lithium is completed, and then incubated 0.4h,Cooled to minus 65 degrees Celsius,100 mL of N, N-dimethylformamide was added dropwise,After dropping N, N-dimethylformamide overnight at room temperature,The whole was cooled to 0 degrees Celsius, 300ml deionized water was added dropwise after quenching.S2, extracted with 500 ml of ethyl acetate each time,Repeat 2 times to separate the organic phase,Each time with 500ml saturated brine wash,Repeat washing 2 times, with 50g anhydrous sodium sulfate drying 1h,Suction filtration, then decompression rotary steaming,The product from S2 step is 1-methyl-1H-pyrazole-5-carbaldehyde.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Methylpyrazole, its application will become more common.

Reference:
Patent; Beijing Luhe Ningyuan Technology Co., Ltd.; Jiang Yongjun; Xing Lixin; Liu Bo; (11 pag.)CN106928143; (2017); A;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1453-58-3, name is 3-Methylpyrazole, A new synthetic method of this compound is introduced below., Formula: C4H6N2

3-Methyl-1H-pyrazole (0.66 g, 8 mmol) and potassium tertbutoxide (0.88 g, 7.8 mmol) were dissolved in dry dimethyl sulfoxide (DMSO) (5 mL) at room temperature. To the basic solution, 2-bromopyridine (1.17 g, 7.4 mmol) was added slowly under constant stirring, and the solution was heated to reflux under nitrogen for 12 h. Once the reaction completed, it was cooled to room temperature and extracted with water and ether. The organic layer was washed withwater and ether to remove DMSO and excess base. The organic layer was then isolated, dried over anhydrous Na2SO4, and filtered. The solvent was then removed under reduced pressure, and the resultant colorless oil was purified by column chromatography on silica gel (200e300 mesh) eluted with hexane/ethylacetate (9:1 v/v). 1H NMR (500 MHz, CD2Cl2) delta (ppm): 8.43 (1H, d, J 2.53), 8.38 (1H, d, J 4.88), 7.91 (1H, d, J 8.30), 7.79e7.74 (1H, m), 7.59-7.47 (1H, m), 6.25 (1H, d, J 2.53), 2.38 (3H, s).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Sunesh, Chozhidakath Damodharan; Subeesh, Madayanad Suresh; Shanmugasundaram, Kanagaraj; Chitumalla, Ramesh Kumar; Jang, Joonkyung; Choe, Youngson; Dyes and Pigments; vol. 128; (2016); p. 190 – 200;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1192-21-8, name is 1-Methyl-1H-pyrazol-5-amine, A new synthetic method of this compound is introduced below., Computed Properties of C4H7N3

(S)-7-(2-chloro-5-methylpyrimidin-4-yl)-3-methyl-2-((2-methyl-2H- 1 ,2,3-triazol-4- yl)methyl)-3 ,4-dihydropyrrolo [1 ,2-a]pyrazin- 1 (211)-one (190 mg, 0.51 mmol), 1-methyl- 1H-pyrazol-5-amine (54.6 mg, 0.56 mmol), cesium carbonate (333 mg, 1.02 mmol) and BrettPhos 3rd generation pre-catalyst (23.16 mg, 0.03 mmol) were suspended in tertbutanol (6mL) and de-gassed for 10 minutes. The reaction was heated to 80 °C for 18hours under nitrogen. Reaction mixture was cooled to room temperature, diluted with ethyl acetate (100 mL) and washed with saturated aqueous sodium bicarbonate (25 mL), dried over sodium sulfate and concentrated in vacuo to give a yellow solid. The crude product was dissolved in DMSO (5 mL), filtered and purified by preparative HPLC (Waters XBridge Prep C18 OBD column, Sji silica, 30 mm diameter, 100 mm length),using decreasingly polar mixtures of water (containing 1percent NH3) and MeCN as eluents.Fractions containing the desired compound were evaporated to dryness to afford (S)-3-methyl-7-(5 -methyl-2-(( 1-methyl-i H-pyrazol-5 -yl)amino)pyrimidin-4-yl)-2-((2-methyl-2H- 1,2,3 -triazol-4-yl)methyl)-3 ,4-dihydropyrrolo [1 ,2-a]pyrazin- 1 (211)-one (102 mg, 46.2percent) as a white solid. ?H NMR (500 MHz, DMSO, 30 °C) 1.15 (3H, d), 2.33 (3H, s), 3.70(3H, s), 3.9 – 4.01 (1H, m), 4.12 (3H, d), 4.14 – 4.32 (2H, m), 4.35 (1H, d), 5.08 (1H, d),6.27 (1H, d), 7.26 (1H, d), 7.34 (1H, d), 7.64 (1H, d), 7.69 (1H, s), 8.24 (1H, s), 9.08 (1H,s). mlz: ES+ [M+H]+ = 433.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ASTRAZENECA AB; WARD, Richard, Andrew; GRAHAM, Mark, Andrew; SWALLOW, Steven; JONES, Clifford, David; (282 pag.)WO2016/162325; (2016); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 69843-13-6, name is 1-Methyl-1H-pyrazol-4-amine, A new synthetic method of this compound is introduced below., Recommanded Product: 69843-13-6

Example 4.082- [ [5-Fluoro-2- [(l-methylpyrazol-4-yl)aminol -4-pyridyll amino I -N-methyl-benzamide A mixture of l-methylpyrazol-4-amine (41.7 mg, 0.43 mmol), 9,9-dimethyl-4,5- bis(diphenylphosphino)xanthene (41.4 mg, 0.07 mmol), bis(dibenzylideneacetone)palladium (32.7 mg, 0.057 mmol), sodium tert-butoxide (51.5 mg, 0.54 mmol), and 2-[(2-chloro-5-fluoropyridin-4-yl)amino]-N-methylbenzamide (100 mg, 0.36 mmol) was suspended in dioxane (3 mL). The mixture was heated at 150C for 30 minutes in a microwave reactor and then allowed to cool to room temperature. The mixture was loaded onto an SCX column and the product eluted first with MeOH and then with a 7M solution of NH3 in MeOH. Fractions containing product were combined and evaporated. The residue was purified by preparative HPLC and fractions containing product were combined and evaporated to afford example 4.08 (51.2 mg, 42% yield); 1H NMR spectrum: (300 MHz, DMSO) delta 2.78 (3H, d), 3.77 (3H, s), 6.66 – 6.68 (IH, m), 7.07 – 7.10 (IH, m), 7.31 (IH, s), 7.47 – 7.56 (2H, m), 7.69 – 7.72 (IH, m), 7.84 (IH, s), 7.91 – 7.92 (IH, m), 8.51 (IH, s), 8.64 (IH, q), 10.08 (IH, d); Mass spectrum: m/z (ESI+) (M+H)+ = 341.04.

The synthetic route of 69843-13-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2009/153589; (2009); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 31108-57-3, name is 1H-Pyrazole-4-carbonitrile, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 31108-57-3, Quality Control of 1H-Pyrazole-4-carbonitrile

General procedure: The appropriate carboxylic acid (1.0 equiv) was treated with oxalylchloride (1.1 equiv) in CH2Cl2 (0.5 M) at 0 C. The reaction mixture wasstirred at room temperature for 1 h. The solvent was removed under N2and the acid chloride (1 equiv) was dissolved in anhydrous CH2Cl2(0.5 M). The appropriate pyrazole (1.0 equiv) was dissolved in CH2Cl2(0.5 M) and cooled to 0 C. The acid chloride (1 equiv) in CH2Cl2 (0.5 M) was added dropwise and the reaction mixture was stirred atroom temperature for 3 h. The mixture was diluted with EtOAc, washedwith saturated aqueous NaCl, and dried over Na2SO4. Evaporationunder reduced pressure yielded the crude product that was purified byflash chromatography (SiO2).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-Pyrazole-4-carbonitrile, and friends who are interested can also refer to it.

Reference:
Article; Otrubova, Katerina; Chatterjee, Shreyosree; Ghimire, Srijana; Cravatt, Benjamin F.; Boger, Dale L.; Bioorganic and Medicinal Chemistry; vol. 27; 8; (2019); p. 1693 – 1703;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Application of 35344-95-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 35344-95-7, name is 1H-Pyrazole-4-carbaldehyde belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a mixture of 4-fluorobenzonitrile (2.49 g, 20.6 mmol) and 4-formylpyrazole (1.98 g, 20.6 mmo) in 50 mL of DMF at 0 0C was added 95percent sodium hydride (0.54 g, 22.7 mmol) under nitrogen. The mixture was heated to 60 0C for 6 hours and cooled to room temperature, Water was added carefully and the mixture was then extracted with ethyl acetate. The combined extracts were washed with water and brine, and then dried over sodium sulfate, filtered, and concentrated in vacuo to provide crude 4~(4-formyMH-pyrazol-l-yl)benzonitrile.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Pyrazole-4-carbaldehyde, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; DI MARCO, Christina, Ng; WO2010/19391; (2010); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

1120-82-7, Adding a certain compound to certain chemical reactions, such as: 1120-82-7, name is (1H-Pyrazol-1-yl)methanol, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1120-82-7.

General procedure: The target pyrazoly compounds (Scheme 2), were preparedin one step by condensation of one equivalent of (3,5-dimethyl-1H-pyrazol-1-yl) methanol ((1H-pyrazol-1-yl)methanol) with one equivalent of an appropriate amine in20 mL of acetonitrile (CH3CN) as solvent. All reactionswere carried out at reflux for 4 h. The liquid residue is driedover MgSO4, filtered and concentrated in vacuum.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (1H-Pyrazol-1-yl)methanol, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Abrigach; Karzazi; Benabbes; El Youbi; Khoutoul; Taibi; Karzazi; Benchat; Bouakka; Saalaoui; Touzani; Medicinal Chemistry Research; vol. 26; 8; (2017); p. 1784 – 1795;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1904-31-0, name is 1-Methyl-1H-pyrazol-3-amine, A new synthetic method of this compound is introduced below., Application In Synthesis of 1-Methyl-1H-pyrazol-3-amine

Example 113:; 4-(3,5-Difluoro-phenoxy)-2,2-dimethyl-2,3-dihydro-benzofuran-6-carboxylic acid (1- methyl-1 H-pyrazol-3-yl)-amide; To a mixture of 4-(3,5-difluoro-phenoxy)-2,2-dimethyl-2,3-dihydro-benzofurapi-6-carboxylic acid (113b) (0.308 g, 0.00096 mol), EDCI (0.28 g, 0.0015 mol), HOBt (0.21 g, 0.0015 mol) and NMM (0.49 g, 0.0048 mol) in CH2CI2 (15 mL) was added 1-methyl-1H-pyrazol-3-amine (0.11 g, 0.001 mol) in one portion. The mixture was stirred at room temperature overnight. The reaction mixture was washed with water, aq. citric acid and then sat. NaHCO3. The organic phase was dried over Na2SO4 and concentrated to give a brown oil. The crude oil was purified by prep. HPLC to give the title compound (95 mg, 51percent yield) as a white solid. 1H NMR (400 MHz, CDCI3): delta 8.82 (s, 1H)1 7.20 (m, 2H), 7.03 (d, 2H), 6.73 (s, 1H), 6.42 (m, 3H), 3.72 (s, 3H)1 2.84 (s, 2H), 1.42 (s, 6H); LCMS for C2IH19F2N3O3 m/z 400.4 (M+H)+.

The synthetic route of 1904-31-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PFIZER PRODUCTS INC.; WO2007/122482; (2007); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 930-36-9 as follows. HPLC of Formula: C4H6N2

To a stirred solution of 1-methyl-1H-pyrazole (609 mmol) in dry ether (600 mL) under an atmosphere of nitrogen was added a solution of n-BuLi in hexane (2.6M, 670 mmol) dropwise at -78oC over a period of 1 h. The reaction mixture was stirred at this temperature for a further 1 hour, and then dry carbon dioxide gas was passed through the mixture at -78oC for 30 min. The reaction mixture was then allowed to warm to room temperature and quenched with water (500 mL). The aqueous phase was separated, washed with ether (500 mL) and cooled to 2-3oC. To the stirred mixture was added concentrated aqueous hydrochloric acid until a pH of 3 was obtained. The resulting precipitate was collected by filtration, washed with ice-cold water (20 mL), dried first in open air, and then in a vacuum desiccator over phosphorus pentoxide to afford 2-methyl-2H-pyrazole-3-carboxylic acid as a white powder. Compound wt: 35.3 g, 45.4% yield. 1H NMR (400 MHz, DMSO-d6) delta: 13.31(1H, bs); 7.50 (1H, d); 6.81 (1H, d); 4.07 (3H, s).

According to the analysis of related databases, 930-36-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dykes, Graeme James; Fletcher, Stephen Robert; Menet, Christel Jeanne Marie; Merayo, Nuria Merayo; Schmitt, Benoit Antoine; US2008/242661; (2008); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Reference of 31230-17-8,Some common heterocyclic compound, 31230-17-8, name is 5-Methyl-1H-pyrazol-3-amine, molecular formula is C4H7N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of compound C (1.0 g, 2.94 mmol)and 3-amino-5- methylpyrazole (314 mg, 3.23 mmol) in dimethylformamide (6 ml) was treated with diisopropylethylamine (0.614 ml, 3.53 mmol) and sodium iodide (530 mg, 3.53 mmol). The mixture was stirred under nitrogen at 85 ° for 4 hours, cooled to room temperature and diluted with ethyl acetate. The solution was washed with water (x 4), dried over magnesium sulphate and concentrated to 5 ml to afford, upon crystallization and harvesting of colourless crystals, the title compound D (920 mg, 78percent). 1H-NMR DMSO-d6, delta 0.80-0.87 (4H, m), 1.77-1.85 (IH, m), 1.92 (IH, s), 5.24 (IH, br s), 6.47 (IH, br s), 7.55 (2H, d), 7.70-7.80 (2H, m), 10.24 (IH, s), 10.47 (IH, s), 11.92 (IH, s).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Methyl-1H-pyrazol-3-amine, its application will become more common.

Reference:
Patent; MERCK & CO., INC.; WO2008/13807; (2008); A2;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics