Category: 1280210-79-8

Application of 1280210-79-8, These common heterocyclic compound, 1280210-79-8, name is tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 2. A solution of tert-butyl 2H,4H,5H,6H-pyrrolo[3,4-c]pyrazole-5- carboxylate (250 mg, 1 . 1 mmol, 1 ,00 equiv) in DCM (5 mL) and TFA (5 mL) was stirred at rt overnight. The reaction mixture was concentrated under vacuum and the residue was redissolved in 20 mL of concentrated HC1 and then concentrated under vacuum again to yield 200 mg of crude 2H,4H,5H,6H-pyrrolo[3 ,4-c]pyrazole hydroch loride as a dark red sol id. LC/MS ( Method C, ESI): RT = 0.46 min, m z = 1 1 0.0 [M+H] .

Statistics shows that tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate is playing an increasingly important role. we look forward to future research findings about 1280210-79-8.

Reference of 1280210-79-8, The chemical industry reduces the impact on the environment during synthesis 1280210-79-8, name is tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, I believe this compound will play a more active role in future production and life.

under nitrogen protection, intermediate 2(1000 mg, 4.78mmol) is dissolved in N, N – (15 ml) in dimethyl formamide, lowering the temperature to -15 C, adding double (trimethyl xi) sodamide (4.78 ml, 2 mol/L, 9.56mmol), stirring 30 minutes, dropping S – cyclopentyl sulphur acyl radicals (1.37g, 8.13mmol), keep the -15 C reaction 16 hours. The end of the reaction, raising the temperature to 0 C, adding water to the reaction solution (20 ml) quenching the reaction, ethyl acetate (20mL × 2) extraction, the combined organic layer, drying with anhydrous sodium sulfate, concentrated. Re-dissolved in tetrahydrofuran (20 ml) in, cooling to -10 C to 0 C, adding 3rd butanol potassium (85 mg, 0.76mmol), this temperature is kept under 24 hours reaction. The end of the reaction, by adding saturated ammonium chloride solution (10 ml), water (10 ml), ethyl acetate (20mL × 3) extraction, the combined organic layer, drying with anhydrous sodium sulfate, concentrated. Silica gel column chromatography separation and purification of the residue (petroleum ether/ethyl acetate (v/v)=5:1), to obtain white solid6a(800 mg, yield 62%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, other downstream synthetic routes, hurry up and to see.

Adding a certain compound to certain chemical reactions, such as: 1280210-79-8, name is tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1280210-79-8, name: tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate

To a suspension ofNaH (0.30 g, 7.5 mmol) in dry THF (5 mL) under nitrogen atmosphere at 0 C was added a solution of 4 (0.78 g, 3.7 mmol) in dry THF (30 mL). Thereaction mixture was allowed to come to room temperature and continued the stirring for 2hours. Reaction mixture was again cooled to 0 C. A solution of3 (2.0 g, 7.4 mmol) in THF (25mL) was added to the reaction mixture and continued the stirring for another 1 hour. Thereaction mixture was quenched with water (100 mL) and extracted with EtOAc (3 x 200 mL). Combined organics were dried over Na2S04, filtered, concentrated under vacuum and purifiedby silica gel chromatography afforded 5 as an off-white solid.251H NMR (400 MHz, CDCh): o 7.84- 7.88 (m, 1H), 7.78 (t, J = 8.27 Hz, 2H), 7.23- 7.30 (m,2H), 4.39 – 4.49 (m, 4H), 3.53 ( d, J = 2.40 Hz, 3H), 2.42 (s, 3H), 1.53 (s, 9H).; MolecularFormula: C1sHz4N40sSz; LCMS purity: 98.18%; Expected: 440.1; Observed: 341.0 (M-99).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, other downstream synthetic routes, hurry up and to see.

Adding a certain compound to certain chemical reactions, such as: 1280210-79-8, name is tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1280210-79-8, HPLC of Formula: C10H15N3O2

under nitrogen protection, Intermediate 2(1000 mg, 4.78mmol) is dissolved in N, N – dimethyl formamide(15ml), lowering the temperature to -15 C, sodium bis(trimethylsilyl)amide (4.78 ml, 2 mol/L, 9.56mmol), was added stirring 30 minutes, will S – tetrahydrofuran -3 – sulfonyl chloride (1.39g, 8.13mmol) is added in the reaction solution, to maintain this temperature reaction is 16 hours. The end of the reaction, raising the temperature to 0 C, adding water to the reaction solution (20 ml) quenching the reaction, ethyl acetate (20mL × 2) extraction, the combined organic layer, drying with anhydrous sodium sulfate, concentrated, re-dissolved in tetrahydrofuran (20 ml) in, cooling to -10 C to 0 C. Adding 3rd butanol potassium (85 mg, 0.76mmol), this temperature is kept under 24 hours reaction. The end of the reaction, by adding saturated ammonium chloride solution (10 ml), water (10 ml), ethyl acetate (20mL × 3) extraction, the combined organic layer, drying with anhydrous sodium sulfate, concentrated. Silica gel column chromatography separation and purification of the residue (petroleum ether/ethyl acetate (v/v)=5:1), to obtain white solid5a(810 mg, 62.3% yield).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Synthetic Route of 1280210-79-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1280210-79-8, name is tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

A solution of the product from Step B (100 g, 478 mmol) in anhydrous N,N- dimethylformamide ( 1.0 L) was cooled to -40 C and treated with 1 M sodiumbis(trimethylsilyl)amide in tetrahydrofuran (502 mL, 502 mmol) slowly over 20 min. The temperature warmed to -30 C during the addition and the mixture was stirred at this temperature for 1 h. Methanesulfonyl chloride (44.7 mL, 573 mmol) was slowly added via addition funnel and stirred for an additional 1.5 h at -30 to -40 C. The reaction mixture was quenched with ice (3.5 kg), slowly warmed to ambient temperature and stirred for 48 h. The resulting white solid was filtered, washed with water and suction dried to afford the title compound. LC/MS: 288.1 (M+l).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, other downstream synthetic routes, hurry up and to see.

Electric Literature of 1280210-79-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1280210-79-8 name is tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Synthesis of 257-B and 258-B. To a solution of 257-A and 258-A (270 mg, 1.21 mmol) in DCM (6 mL) was added TFA (2 mL) dropwise under ice bath. Then the solution was stirred at room temperature 1 h. The solvent was removed in vacuo to give 257-B and 258-B as a crude product.Synthesis of 257-C and 258-C. A mixture of 257-B and 258-B (crude product from last step) and 143-C (286 mg, 0.61 mmol) in acetonitrile (10 mL) was stirred at 50 oC for 30 min, then Na2CO3 (581 mg, 6.05 mmol) was added into above mixture and stirred at 50 oC for 1 h. The mixture was cooled to room temperature. Na2CO3 was removed by filtered, the filtrate was concentrated in vacuo. The residue was purified by column chromatography on silica gel (DCM : MeOH = 200 : 1) to give 257-C (100 mg, 44%) as a yellow solid and 258-C (50 mg, 22%) as a yellow solid.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, and friends who are interested can also refer to it.

Application of 1280210-79-8, The chemical industry reduces the impact on the environment during synthesis 1280210-79-8, name is tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, I believe this compound will play a more active role in future production and life.

INTERMEDIATE 6; 2-(2-Hydroxy-2-methylpropyl -2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazol-5-ium trifluoroacetate saltTo a stirred solution of tert-butyl 2,6-dihydropyrrolo[3 ,4-c]pyrazole-5(4H)-carboxyIate(35 g, 167 mmol) in DMF (500 mL) at 0 C under N2 was added sodium hexamethyldisilazide in THF (351 mL, 351 mmol) and the mixture was stirred at 0 C for 30 min. Isobutylene oxide (74.3 mL, 836 mmol) was then slowly added. The solution was stirred at 0C for 0.5 h and then stirred at room temperature for 1 h. The solution was heated to 80C for 100 min in a microwave oven, cooled to room temperature and evapoarted under vacuum. The residue was purified by column chromatography on silica gel, eluting with a gradient of 0% to 6% CH2Cl2 MeOH (containing 1 % NH4OH) to give a mixture of two regioisomers. The mixture of tworegioisomers A and B was resolved by chromatography on a ChiralPak AD-H column eluting with 4-40% MeOH/C02 to give isomer A as the faster eluting isomer and isomer B as the slower eluting isomer. NMR (500 MHz, CD3OD) for isomer B: 67.42 (d, 1 H); 4.42 (s, 2H); 4. 1 (s, 2H); 4.07 (s, 2H); 1.51 (d, 9H); 1.16 (s, 6H). LC-MS: 226.27 (M+l-56).The desired isomer B was treated with 1 :1 TFA/C?C12 for 1 h to give the title compound. NMR (500 MHz, CD3OD): 57.55 (s, 1H); 4.43 (s, 2H); 4.39 (s, 2H); 4.10 (s, 2H);1.17 (s, 6H). LC-MS: 182.31 (M+l).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, other downstream synthetic routes, hurry up and to see.

Application of 1280210-79-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1280210-79-8, name is tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

INTERMEDIATE 6; 2-(2-Hydroxy-2-methylpropyl -2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazol-5-ium trifluoroacetate saltTo a stirred solution of tert-butyl 2,6-dihydropyrrolo[3 ,4-c]pyrazole-5(4H)-carboxyIate(35 g, 167 mmol) in DMF (500 mL) at 0 C under N2 was added sodium hexamethyldisilazide in THF (351 mL, 351 mmol) and the mixture was stirred at 0 C for 30 min. Isobutylene oxide (74.3 mL, 836 mmol) was then slowly added. The solution was stirred at 0C for 0.5 h and then stirred at room temperature for 1 h. The solution was heated to 80C for 100 min in a microwave oven, cooled to room temperature and evapoarted under vacuum. The residue was purified by column chromatography on silica gel, eluting with a gradient of 0% to 6% CH2Cl2 MeOH (containing 1 % NH4OH) to give a mixture of two regioisomers. The mixture of tworegioisomers A and B was resolved by chromatography on a ChiralPak AD-H column eluting with 4-40% MeOH/C02 to give isomer A as the faster eluting isomer and isomer B as the slower eluting isomer. NMR (500 MHz, CD3OD) for isomer B: 67.42 (d, 1 H); 4.42 (s, 2H); 4. 1 (s, 2H); 4.07 (s, 2H); 1.51 (d, 9H); 1.16 (s, 6H). LC-MS: 226.27 (M+l-56).The desired isomer B was treated with 1 :1 TFA/C?C12 for 1 h to give the title compound. NMR (500 MHz, CD3OD): 57.55 (s, 1H); 4.43 (s, 2H); 4.39 (s, 2H); 4.10 (s, 2H);1.17 (s, 6H). LC-MS: 182.31 (M+l).

The synthetic route of tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1280210-79-8, name is tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, A new synthetic method of this compound is introduced below., Formula: C10H15N3O2

3 -(Bromomethyl)- 1,1 -difluoro-cyclobutane (505 mg, 2.73 mmol) was added dropwisc over 15 mm, to a mixture of tert-butyl 4,6-dihydro-2H-pyrrolo[3,4- c]pyrazole-5-carboxylate (560 mg, 2.67 mmol), cesium carbonate (1.39 g, 4.28 mmol) and DMF (5 mL) at 0 C. The reaction mixture was allowed to warm to ambient temperature and stirred for 18 h. The solvent was concentrated and the material was partitioned betweenwater (50 mL) and EtOAc. The aqueous layer was washed with EtOAc (2 x 30 mL). The combined organic layers were washed with brine, dried (MgSO4), and the solvent was concentrated. Purification (FCC, Si02 using ether) provided the title compound (344 mg, 41%). ?H NMR (300 MHz, CDC13) 3 = 7.10 (d, J = 10.0 Hz, 1H), 4.50 -4.37 (m, 4H), 4.18 (d, J = 5.5 Hz, 2H), 2.78-2.56 (m, 3H), 2.47-2.25 (m, 2H), 1.50 (s, 9H); [M+H] = 314.26.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Synthetic Route of 1280210-79-8,Some common heterocyclic compound, 1280210-79-8, name is tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, molecular formula is C10H15N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

INTERMEDIATE 8; Step A: fert-Butyl 2- { 2-(trimethylsilyl)ethoxy1methyI } -2 , 6-dihvdropwrol o [3 A- c1pyrazole-5(4HVcarboxylateTo a stirred solution of tert~buty 2,6-dihydropyrrolo[3f4~c]pyrazole-5(4H)- carboxylate (20 g, 96 mmol) in DMF (200 mL) at 0 C was added sodium hydride (4.21 g, 105 mmol). After stirring for 1 h at RT, 2-trimethylsilylethoxymethyl chloride (SEM-C1) (4.65 mL, 26.3 mmol) was added. The resulting mixture was stirred at RT overnight. The mixture was quenched with saturated NH4OH, and the solvents were removed. The residue was diluted with ethyl acetate (500 mL), washed with water, brine, dried over anhydrous sodium sulfate and concentrated. The residue was purified by column chromatography on a silica gel Biotage 65i column, eluting with 0 to 20% ethyl acetate in hexanes to give the title compound as a colorless gum. LC-MS: 340.1 (M+H)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, its application will become more common.