Tag: M.W:100-200

Reference of 118430-73-2, These common heterocyclic compound, 118430-73-2, name is 3-(tert-Butyl)-1-methyl-1H-pyrazol-5-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 4: Synthesis of compound A-6Activation of 10 g (38.2 mmol) of compound A-5 is achieved by treatment with thionyl chloride (17 mL) at 70 C for 3 h. The reaction mixture is cooled to room temperature and excess thionyl chloride is removed under reduced pressure. The crude acid chloride is dissolved in DCM (100 mL) and added to a solution of 5.84 g (38.2 mmol) of 5-tert-butyl-2-methyl-2H-pyrazol-3-ylamine and N,N-diisopropylethylamine (13.27 mL) in DCM (150mL). The reaction is stirred at room temperature for 16 h. The solvent is removed under reduced pressure. The residue is dissolved with DCM (300 mL) and washed with saturated aqueous NaHC03 solution (300 mL). The organic layer is separated and washed with brine (300 mL). and dried over Na2S04, filtered and the filtrate is concentrated under reduced pressure. The crude product is purified by column chromatography (200 g silica, eluent: DCM, 0-20% ethyl acetate). The resulting solid is washed sparingly with cyclohexane, then dried under vacuum to afford 12.145 g of compound A-6 as a pink powder. Yield 80%; ES-MS: m z 398/400 [M+H]; 1H-NMR (400 MHz, CHLOROFORM-d) delta rhorhoetaiota 1.30 (9 H, s), 1.62 (6 H, s), 3.78 (3 H, s), 6.22 (1 H, s), 7.48 – 7.68 (2 H, m), 7.70 – 7.96 (2 H, m), 8.88 (1H, s).

The synthetic route of 118430-73-2 has been constantly updated, and we look forward to future research findings.

Related Products of 3112-31-0, A common heterocyclic compound, 3112-31-0, name is 1H-Pyrazole-3,5-dicarboxylic acid, molecular formula is C5H4N2O4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4 was synthesized by mixing 0.0118g of Mn, 0.0164g of KMnO4, 0.0343g of YCl3¡¤6H2O, 0.0544g of H3dpc, and 6.8g of distilled water. The homogeneous mixture was sealed into an autoclave (40mL) and put in a preheated oven at 180¡ãC for 3days. The single crystal particles of 4 obtained mixed with other phases that cannot be well separated from each other. Efforts for synthesis pure 4 were unsuccessful due to the tendency to yielding 3.

The synthetic route of 3112-31-0 has been constantly updated, and we look forward to future research findings.

Electric Literature of 313735-62-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 313735-62-5 name is 4-Bromo-1-isopropylpyrazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

4-bromo-1-(isopropyl)-1H-pyrazole 11d (200 mg, 1.06 mmol) was dissolved in dry THF (6 mL) at -78 Cunder nitrogen and was stirred for 10 min. n-BuLi (2.5 M in hexanes, 0.44 mL, 1.11 mmol) was added drop wise to the solution was stirred for 2 h at -78 C. After two hours, ethyl difluoroacetate (0.11 mL, 1.27 mmol) was added drop wise and stirred for 10 min at -78 C uponwhich the mixture was then quenched with NH4Cl (20 mL) and warmed to room temp. Themixture was then extracted with ether (50 mL), and dried over MgSO4. After concentration invacuo (note: remove shortly after the ether is removed, because the compound is quite volatile),the residue was purified with flash chromatography over silica gel (hexane: ethyl acetate =80:20) to yield the product as a clear oil in 48% yield (0.1 g).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Bromo-1-isopropylpyrazole, and friends who are interested can also refer to it.

Reference of 1260243-04-6, A common heterocyclic compound, 1260243-04-6, name is Ethyl 5-amino-1H-pyrazole-4-carboxylate, molecular formula is C6H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of ethyl 5-amino-lH-pyrazole-4-carboxylate (3.0 g, 19.3 mmol) in acetic acid (40 mL) and ethanol (10 mL) was added 1,1,3,3-tetramethoxypropane (3.48 g, 21.4 mmol). The reaction mixture was stirred at 90 ¡ãC overnight and cooled down to room temperature and then concentrated in vacuo. The residue was diluted with ethyl acetate (100 mL) and washed with saturated NaHC03aqueous solution (20 mL) and then dried over anhydrous Na2S04, filtered and concentrated in vacuo. The residue was purified by a silica gel column chromatography (DCM/EA (v/v) = 6/1) to give the title compound as a light yellow solid (3.2 g, 85percent).LC-MS (ESI, pos. ion) m/z: 192.3 [M+H]+; H NMR (600 MHz, CDC1 ): delta (ppm) 8.81 (m, 1H), 8.78 (m, 1H), 8.61 (s, 1H), 7.04 (dd, J = 6.9, 4.1 Hz, 1H), 4.47 (q, J= 7.1 Hz, 2H), 1.44 (t, J = 7.1 Hz, 3H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 27258-33-9, name is 1-Methyl-1H-pyrazole-5-carbaldehyde, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 27258-33-9

(ii) (1-Methyl-1 H-pyrazol-5-yl)methanol was prepared as follows (c.f. Bioorg. Med. Chem., 2001 , 9, 961-982): A stirred solution of 1-methyl-1 H-pyrazole-5- carbaldehyde (5.2 g, 47 mmol) in ethanol (50 ml) at 5C was treated with sodium borohydride (893 mg, 23. 5mmol). The reaction mixture was stirred at 5C for 30 minutes, hydrochloric acid (5N, 10 ml) was added and the organic solvent was evaporated. The residue was partitioned between ethyl acetate and water. The layers were separated and the aqueous solution was saturated with sodium chloride and re-extracted with ethyl acetate. The combined organic extracts were washed with brine, then dried and evaporated to afford (1-methyl-1 H-pyrazol-5-yl)methanol which was used in the next step.

According to the analysis of related databases, 27258-33-9, the application of this compound in the production field has become more and more popular.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2458-26-6, name is 3-Phenyl-1H-pyrazole, A new synthetic method of this compound is introduced below., HPLC of Formula: C9H8N2

1.57 g of 3-phenylpyrazole was dissolved in 11 ml of N,N-dimethylformamide. To the resulting solution was added 0.50 g of 60% sodium hydride, and the entire mixture was stirred for 1.5 hours at room temperature. To this mixture was added a solution containing 2.90 g of the 1-tert-butoxycarbonylpiperidin-4-yl methanesulfonate dissolved in 2 ml of N,N-dimethylformamide, and the entire mixture was stirred for two hours at 50C, one hour at 70C, and then 3.5 hours at 100C. The reaction liquid was then poured into water, and extracted twice with ether. The organic layer was washed three times with water and dried over anhydrous magnesium sulfate, and the solvent was then removed by evaporation under reduced pressure. The residue was purified by silica gel column chromatography (developing solvent: hexane/ethyl acetate = 4/1 (volume ratio)), yielding 1.54 g of the target compound.

The synthetic route of 2458-26-6 has been constantly updated, and we look forward to future research findings.

Reference of 1752-88-1, These common heterocyclic compound, 1752-88-1, name is 3-Pyrazolidinone hydrochloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Alkylation of 20 with 21 to give 22 Potassium carbonate (8.28 g, 60.0 mmol), methyl 5-(3-bromopropyl)-thiophene-2-carboxylate (21, for preparation, see Billot, X. et al WO2004/037786, incorporated by reference herein, 5.66 g, 21.5 mmol), 3-pyrazolidinone HCl (20, 2.57 g, 21.0 mmol) and DMF (25 mL) were combined under argon and stirred at rt. After 3 d at rt, HPLC analysis indicated the reaction to be complete and EtOAc (100 mL) was added. The mixture was washed with water (2¡Á75 mL). The combined aqueous phase was back-extracted with EtOAc (50 mL). The combined organic phase was washed with brine (75 mL), filtered through filter paper and concentrated in vacuo to afford 7.5 g of a crude oil. Purification of the crude product by flash column chromatography on 75 g silica gel (50% CH2Cl2/hexane?CH2Cl2?20% EtOAc/CH2Cl2?100% EtOAc?10% MeOH/EtOAc, gradient) afforded 3.2 g (57%) of 22 which solidified on standing.

The synthetic route of 1752-88-1 has been constantly updated, and we look forward to future research findings.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 127107-23-7, name is 1-Methyl-1H-pyrazol-4-amine hydrochloride, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 1-Methyl-1H-pyrazol-4-amine hydrochloride

To a solution of tert-butyl ((1S,5R,6R)-3-(2-chloro-5-fluoropyrimidin-4-yl)-6-methyl-3-azabicyclo[3.1.0]hexan-1-yl)carbamate (42, 1.0 g, 2.91 mmol) in isopropanol (10 mL) was added 1-methyl-1H-pyrazol-4ylamine hydrochloride (506 mg, 3.79 mmol) and the reaction was heated to 140 C under microwave irradiation for 1 h. The resulting solid was filtered and dried to afford (1S,5R,6R)-3-(5-fluoro-2-((1-methyl-1H-pyrazol-4-yl)amino)pyrimidin-4-yl)-6-methyl-3-azabicyclo[3.1.0]hexan-1-amine hydrochloride (43, 991 mg, 86%). MS m/z 304 [M+H]+

According to the analysis of related databases, 127107-23-7, the application of this compound in the production field has become more and more popular.

Reference of 3524-32-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3524-32-1, name is 5-Amino-1,3-dimethylpyrazole, This compound has unique chemical properties. The synthetic route is as follows.

To a solution of 9-((4-chloro-l H-pyrazol- l-yl)methyl)-4-(2- (rnethylsulfonyl)pyrimidin-4-yl)-8,9-dihydro-7H-6-oxa-l,2,2al-triazabenzo[cd]azulene (15- 4b, 200 mg, 0.44 mmol), 2,5-dimethylpyrazol-3-amine (149.5 mg, 1.34 mmol) in DMSO (2 mL) was added NaH (35.80 mg, 28 mmol, 60% mineral oil dispersion). The reaction was stirred at RT for 45 min, quenched with water and extracted with EtOAc (3 x 20 mL). The combined extracts were washed with 5% citric acid, brine, dried (Na2S04), filtered and concentrated in vacuo. The crude product was purified by Si02 chromatography (ISCO 12 g column) eluting with a MeOH/DCM gradient (0 to 8% MeOH) to afford 95 mg (88.5%) of the title compound as yellow solid.

The chemical industry reduces the impact on the environment during synthesis 5-Amino-1,3-dimethylpyrazole. I believe this compound will play a more active role in future production and life.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 5334-40-7, name is 4-Nitro-1H-pyrazole-3-carboxylic acid, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C4H3N3O4

In a 250 mL round bottom flask, 7.5 g (36.6 mmol) of crude I-b’ was added. 4-nitro-1H-pyrazole-3-carboxylic acid 6.3 g (40.1 mmol), EDC¡¤HCl 8.4 g (44.0 mmol), HOBt 6.0g (44.4mmol) and anhydrous DMF 100mL, Stir at room temperature for 24 h. The disappearance of the starting material by TLC (methanol: chloroform = 1:10). The reaction solution was poured into 200 mL of ice water. A large amount of pale yellow solid is precipitated, Rest, Thinking about a yellow solid, The obtained crude product was recrystallized from ethyl acetate and methanol to give (I-e) 11.1 g. The yield was 88.2%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 5334-40-7.