Tag: M.W:100-200

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 153912-60-8, name is 1,5-Dimethyl-1H-pyrazol-3-yl-methanol, A new synthetic method of this compound is introduced below., Formula: C6H10N2O

Preparation of 3-(chloromethyl)-l,5-dimethyl-lH-pyrazole hydrochloride: To (l,5-dimethyl-lH-pyrazol-3-yl)methanol (5.01 g, 39.71 mmol) in DCM (80 mL) at 0 C was cautiously added thionyl chloride (25 mL, 343.6 mmol). The cold bath was removed and the reaction mixture was stirred at ambient temperature for 3 hours. The reaction mixture was concentrated under reduced pressure to give crude product (7.32 g).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

These common heterocyclic compound, 26621-44-3, name is 3-Nitro-1H-pyrazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: pyrazoles-derivatives

To a solution of 3-nitro-lH-pyrazole (5.0g, 44.22mmol, l .Oeq) in tetrahydrofuran (50mL) was added sodium hydride (1.6g, 66.33mmol, 1.5eq) at 0C and reaction mixture was stirred for 30 min followed by 2-(Trimethylsilyl)ethoxym ethyl chloride (8.86g, 53.06mmol, 1.2eq) was added at the same temperature. The reaction mixture was allowed to come at room temperature and stirred for 24h. After completion of reaction, reaction mixture was transferred in to ice cold water and extracted with ethyl acetate. Organic layer was combined, washed with brine, dried over sodium sulphate and concentrated under reduced pressure to obtain crude material. This was further purified by column chromatography and compound was eluted on 15% ethyl acetate in hexane as eluent to obtain 185.1. (7.9g, 73.42%). MS(ES): m/z 244.34 [M+H]+

The synthetic route of 3-Nitro-1H-pyrazole has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 63874-95-3, name is 1-Benzyl-1H-pyrazole-4-carbaldehyde, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 63874-95-3, HPLC of Formula: C11H10N2O

General procedure: General procedure: To a solution of 4-formyl-1H-1-tritylprazole (8a) (94.6 mg, 0.28 mmol) inCH2Cl2 (6 mL) was added 70% mCPBA (131.8 mg, 0.53 mmol) at 0 C, with stirring. After 5 h,saturated NaHCO3 aq (10 mL) was added to quench the reaction mixture. The mixture was extractedwith CH2Cl2 3 times. Combined organic layer was dried over MgSO4, filtered, and condensedunder reduced pressure to give a crude formate. To an acetone solution of the crude formate (6 mL),20% NaOH aq (4 mL) was added, then the mixture was heated under reflux for 1 h, then crotyl bromide(48 L, 0.42 mmol) was added to the cooled mixture. After stirring for 3 h, saturated NH4Cl aq wasadded to the reaction mixture to quench, the mixture was condensed under reduced pressure, extractedwith CH2Cl2 for 3 times. The combined CH2Cl2 layer was dried over MgSO4, filtered, and condensedunder reduced pressure to give a crude residue, which was purified with flash column chromatography(EtOAc:Hexane = 1:10) to give 4-(2-butenyl)oxy-1H-1-tritylpyrazole (1e) (54.5 mg, 51%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Synthetic Route of 92933-47-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 92933-47-6, name is 5-Isopropyl-1H-pyrazole-3-carboxylic acid, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: The aqueous solution of Eu(NO3)3.6H2O (1mmol) was treated with threefold excess of ethanolic solution of HIPA (3mmol) and the resulting mixture was thoroughly mixed on magnetic stirrer. The aqueous solution of NaOH was added drop wise to adjust the pH of mixture by 6-7. After constant stirring of 3 hr, off white precipitates of C1 binary complex were appeared which were isolated by vacuum filtration, washed with ethanol and water respectively, and then dried in desiccators.[19] Similarly, ternary complexes C2-C5 were synthesized by adding ethanolic solution of dmbipy, dipy, dmph and phen (1mmol) respectively, to the reaction mixture of europium(III) nitrate (1mmol) and ligand HIPA (3mmol) prior to adjustment of pH of the solution. Binary complex of gadolinium ion with ligand HIPA [Gd(IPA)3.2H2O] is synthesized by similar method as of C1 to calculate the triplet state of ligand. The synthetic routes of ligand HIPA and europium (III) complexes C1-C5 are shown in Fig. 1

The chemical industry reduces the impact on the environment during synthesis 5-Isopropyl-1H-pyrazole-3-carboxylic acid. I believe this compound will play a more active role in future production and life.

Related Products of 37718-11-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 37718-11-9, name is 1H-Pyrazole-4-carboxylic acid belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To the mixture of 4-(4-methylpiperazin-1-yl)-2- (piperidin-1-yl)aniline (0.5 g, 1.82 mmol), 4-cyanofuran-2-carboxylic acid (0.3 g, 2.18 mmol), HATU (0.83 g, 2.18 mmol), in DMF (10 mL) was added DIPEA (0.63 mL, 3.64 mmol). The reaction mixture was stirred at room temperature overnight and then partitioned between EtOAc and brine. The organic layer was separated, dried over anhydrous MgSO4, filtered, and concentrated under a vacuum. The resulting residue was purified by silica gel column chromatography (CH2Cl2: MeOH = 9:1) to give 4-cyano-N-(4-(4-methylpiperazin-1-yl)-2-(piperidin-1-yl)phenyl)furan-2- carboxamide as a pale yellow solid (0.62 g, 86.1% yield).1H NMR (500 MHz, CDCl3) d 9.41 (s, 1H), 8.31 (d, J = 8.7 Hz, 1H), 8.03 (s, 1H), 7.33 (s, 1H), 6.78 (s, 1H), 6.72 (d, J = 8.8 Hz, 1H), 3.19 (s, 4H), 2.83 (s, 4H), 2.59 (s, 4H), 2.36 (s, 3H), 1.76 (s, 4H), 1.63 (s, 2H).

The synthetic route of 1H-Pyrazole-4-carboxylic acid has been constantly updated, and we look forward to future research findings.

Related Products of 121507-34-4, A common heterocyclic compound, 121507-34-4, name is 5-Isopropoxy-1H-pyrazol-3-amine, molecular formula is C6H11N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of 2,3,6-tf chloro-5-nitropyridine (2.61 g, 11.4 mmol) and DIEA (1.90 ml, 11.4 mmol) in TEtaF (50 ml) was added the 5-isopropoxy-lH-pyrazol-3-amine (1.20 g, 8.50 mmol) at 0 0C. After addition, the reaction mixture was stirred at 25 0C for 5 days. The solvent was removed under reduced pressure and the resulting residue was purified by column chromatography (hexane-EtOAc = 2.5 : 1) to give the title compound as a yellow solid (0.77 g, 27%). 1H NMR (400 MHz) delta 12.26 & 11.64 (s, IH), 10.42 & 10.04 (s, IH), 8.81 & 8.77 (s, EPO IH), 6.02 & 5.94 (s, IH), 4.70 & 4.48 (m, IH)3 1.32 (d, J= 6.0 Hz, 3H)5 1.27 (d, J= 6.0 Hz, IH). MS: Calcd.: 331; Found: [MH-H]+ 332

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Some common heterocyclic compound, 20154-03-4, name is 3-(Trifluoromethyl)-1H-pyrazole, molecular formula is C4H3F3N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C4H3F3N2

[00554] Intermediate 55a: ethyl 2-[3-(trifluoromethyl)pyrazol-1-yI]acetate[00555] A solution of 3-(trifluoromethyl)-1 H-pyrazole (75mg, 0.SSmmol) and potassium carbonate (228mg, 1 .6Smmol) were left to stir in MeCN (2mL) for 30 minutes before the addition of ethyl bromoacetate (0.O9mL, 0.83mmol). The reaction mixture was then heated to 60 °C and left to stir for 2 hours. The reaction mixture was quenched by the addition of water (2OmL) and extractedusing EtOAc (3 x 2OmL). The organic layers were combined, dried over Na2504, filtered andconcentrated in vacuo to give ethyl 2-[3-(trifluoromethyl)pyrazol-1-yl]acetate (1 20mg, 0.SSmmol,100percent yield) as a yellow oil which was used in the next step without further purification.1H NMR (CDCI3,400MHz) O/ppm: 7.55 (1H, dd, J= 2.3Hz, 0.9Hz), 6.59 (1H, d, J= 2.2Hz), 4.96 (2H,5), 4.25 (2H, q, J= 7.1Hz), 1.29 (3H, t, J= 7.1Hz).MS Method 2: RT: 1.58 mi m/z 223.1 [M+H]

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 20154-03-4, its application will become more common.

Application of 14531-55-6, The chemical industry reduces the impact on the environment during synthesis 14531-55-6, name is 3,5-Dimethyl-4-nitro-1H-pyrazole, I believe this compound will play a more active role in future production and life.

A mixture of 3,5-dimethyl-4-nitro-1 H-pyrazole (see international patent application WO 2003057673) (3.982g, 28.22 mmol), iodobenzene (11.3 mL, 101.4 mmol), K2CO3 (8.19 g, 59.26 mmol), CuI (268.8 mg, 1.41 mmol), andtrans-N,N?-di-methylcyclohexane-1,2-diamine (890 mL, 5.63 mmol) were heated to 180 C in a microwave reactor for 4h under argon. The reaction mixture was cooled to room temperature, diluted with EtOAc (250 mL), filtered throughcelite, and the product was purified by column chromatography (30?40?75% EtOAc in petroleum ether) to give 4.428g (72%) of the title compound.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3,5-Dimethyl-4-nitro-1H-pyrazole, other downstream synthetic routes, hurry up and to see.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 139756-02-8, name is 4-Amino-1-methyl-3-N-propyl-1H-pyrazole-5-carboxamide belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. name: 4-Amino-1-methyl-3-N-propyl-1H-pyrazole-5-carboxamide

General procedure: To a solution of aromatic aldehydes 8 (1.0 mmol) in acetonitrile, 4-amino-1-methyl-3-propyl-1H-pyrazole-5-carboxamide 10 (1.0 mmol) and InCl3 (10 mol%) were added at room temparature and the reaction mixture was stirred till the completion of the starting materials (indicated by TLC). The solvent was evoparated and the crude product was triturated with 10% diethyl ether in hexane to obtain the pure product. The product was identified by 1H NMR, 13 C NMR and Mass.

The synthetic route of 139756-02-8 has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 5334-40-7, name is 4-Nitro-1H-pyrazole-3-carboxylic acid, A new synthetic method of this compound is introduced below., name: 4-Nitro-1H-pyrazole-3-carboxylic acid

[00842] Example 209: 4- [ (Aminocarbonyl) amino]-l- (3-chloro-4- methoxyphenyl)-1 H-pyrazole-3-carboxamide; [00844] Step 1: Preparation of ethyl 4-nitro-1 H-pyrazole-3-carboxylate [00846] 4-Nitro-1 H-pyrazole-3-carboxylic acid (2 g, 12.73 mmol ; Aldrich) was refluxed in absolute ethanol (25 mL) containing trace sulfuric acid (0. 2. mol) for 5 h. The reaction was evaporated and partitioned between EtOAc and 5% NaHCO3. The EtOAc layer was separated, dried over MgSO4 and filtered. The EtOAc was removed to give a white solid.’H. NMR (300 MHz, DMSO-d6) : 5 1.28 (t, J=7 Hz, 3 H), 4. 34 (q, J=7 Hz, 2 H), 8.91 (s, 1 H), 14.39 (br s, 1 H); MS (ESI+) for CH N 186. 1 (M+H) +.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.