Category: pyrazoles-derivatives

Electric Literature of 10250-64-3,Some common heterocyclic compound, 10250-64-3, name is 1-Methyl-3-phenyl-1H-pyrazole-5-carboxylic acid, molecular formula is C11H10N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of 19 (1.2 eq) and HOBt(1.4 eq) in DMF (0.5 M) were added EDCI (1.3 eq) and a solution of 15a-j or 16a-j (1.0 eq) in DMF (0.25 M), Et3N (3.5 eq) at 0 C. The reaction mixture was stirred at room temperature for 24 hours, then diluted in AcOEt. The organic phase was washed with water twice, saturated aqueous NaHCO3 three times, and brine, then dried over Na2SO4,filtered, and concentrated. The residue was purified by flash column chromatography to give intermediates 17a-j and 18a-j.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Methyl-3-phenyl-1H-pyrazole-5-carboxylic acid, its application will become more common.

Reference:
Article; Nakagawa, Hidehiko; Seike, Suguru; Sugimoto, Masatoshi; Ieda, Naoya; Kawaguchi, Mitsuyasu; Suzuki, Takayoshi; Miyata, Naoki; Bioorganic and Medicinal Chemistry Letters; vol. 25; 23; (2015); p. 5619 – 5624;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Related Products of 139756-02-8, A common heterocyclic compound, 139756-02-8, name is 4-Amino-1-methyl-3-N-propyl-1H-pyrazole-5-carboxamide, molecular formula is C8H14N4O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Synthesis of Bb; Step 7: 4-amino-i -methyl-3 -propyl- 1 H-pyrazole-5-carboxamide (1 eq) and 3 -Nitrobenzaldehyde (1.1 eq ) were suspended in methanol 5 ml and the mixtureheated at 65 C for 1.5 hours after conformation of forming of imine by TLC. Added CuC12 (3 eq) and the reaction mixture heated at7O C under 02 for 2.5 hours. After completion of the reaction, the methanol was removed under vacuum. Then workup with ethyl acetate and water. Separate the organic layer and Water layer re-extracted with 2×25 ml ethyl acetate. The combined organic layers are washed with brinesolution, concentrated under vacuum. The residue was purified by columnchromatography on silica the desired product Bb as a brown solid; yield 85%. ?H NMR(400 MHz DMSO): 8.90 (s 1H), .8.49(m iH), 8.35(m 1H), 7.84-7.80 (m 2H) 4.24(s3H), 2.8(t J = 7.3Hz 2H), 1 .80(m 2H), 0.95(t J = 7.3 Hz 3H). MASS: ESI [M + H] :314.12; Elemental anal. caled. for C15H15N503 C, 57.50; H, 4.83; N, 22.35; 0, 15.32;found C, 57.40; H, 4.85; N, 22.38; 0, 15.37

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; COUNCIL OF SCIENTIFIC AND INDUSTRIAL RESEARCH; SAWANT, Sanghapal Damodar; GINNEREDDY, Lakshma Reddy; MAHESUNI, Srinivas; SYED, Sajad Hussain; DAR, Mohd Ishaq; NARGOTRA, Amit; MAHAJAN, Priya; VISHWAKARMA, Ram Asrey; WO2015/114647; (2015); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Application of 138907-68-3, A common heterocyclic compound, 138907-68-3, name is Ethyl 5-amino-1-(4-fluorophenyl)-1H-pyrazole-4-carboxylate, molecular formula is C12H12FN3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Intermediate 4 (0.001mol) and 5 (0.001mol) were dissolved in pyridine, phosphorus oxychloride is slowly added dropwise under ice bath conditions, then at 40-60C reacted for 5-8h. Finally, the mixture was poured into 30mL saturated Na2CO3 solution and stirred well. After the mixture was acidified, the saturated CuSO4 solution was used to remove pyridine, which greatly improved the purity and yield of the product. The data for compounds 8I-8VI are provided in the supporting information.

The synthetic route of 138907-68-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Liu, Hao; Ren, Zi-Li; Wang, Wei; Gong, Jie-Xiu; Chu, Ming-Jie; Ma, Quan-Wei; Wang, Jie-Chun; Lv, Xian-Hai; European Journal of Medicinal Chemistry; vol. 157; (2018); p. 81 – 87;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Related Products of 95162-14-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 95162-14-4 as follows.

Intermediate 12: Methyl [N- (TERT-BUTOXVCARBONYL)-4- (1-TRITYL-1H-PVRAZOL-4-VL)-L-PHENVLALANINATE] To a mixture of [BROMOPYRAZOLE] (11) (1. 0g, 2. [56MOL),] boronic acid (1) (0.7g, 2. [14MMOL),] and potassium carbonate (1.5g, 10. [7MMOL)] in degassed DME [(10ML)] was added [PDCI2 [DPPF]] (0.088g, [0.] [1MMOL).] The reaction mixture was then heated to [70C] under nitrogen for 24 hours. Solvent was then removed in vacuo, and the residue was partitioned between ethyl acetate and water. The organic portion was dried over sodium sulphate and solvent evaporated in vacuo to give the crude product. Purification via silica gel chromatography (ethyl acetate/petroleum ether 40-60 1: 4) gave the title compound (0.74g) LCMS RT 4.11 min, [[CPH3] + 243]

According to the analysis of related databases, 95162-14-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GLAXO GROUP LIMITED; WO2003/104200; (2003); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Application of 1018446-95-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1018446-95-1, name is tert-Butyl 4-amino-1H-pyrazole-1-carboxylate, This compound has unique chemical properties. The synthetic route is as follows.

1-(2-(2-(2-(1H-Pyrazol-4-ylamino)-5-chloropyrimidin-4-yI)ethyl)phenyl)cyclopropanecarboxamide (19) A solution of 1-(2-(2-(2,5-dichloropyrimidin-4-yl)ethyl)phenyl)cyclopropanecarboxamide A14 (0.070 g, 0.21 mmol) and teit-butyl 4- amino-i H-pyrazole-1-carboxylate (0.11 g, 0.63 mmol) was stirred in MeOH : water (10:1 ratio, 4 mL) at 70 00 for 2 hours and then at 90 00 for 16 hours. The volatiles were removed in vacuo and the residue was purified by silica gel column chromatography (Combiflash Rf, 0-15% MeOH in DCM) to give the title compound 19 as a light yellow solid (0.015 g, 19%). 1H NMR (300 MHz, d6-DMSO) O 0.93- 1.02(m, 2H), 1.38- 1.49 (m, 2H), 3.04-3.16 (m, 4H), 6.03 (brs, 1H), 6.98 (brs, 1H), 7.18-7.39 (m, 4H), 7.48-7.72 (m, 1H), 7.79-8.00 (m, 1H), 8.37 (5, 1H), 9.62 (5, 1H). LCMS-C: rt 4.92 mm; m/z 383 [M+H].

The chemical industry reduces the impact on the environment during synthesis tert-Butyl 4-amino-1H-pyrazole-1-carboxylate. I believe this compound will play a more active role in future production and life.

Reference:
Patent; CANCER THERAPEUTICS CRC PTY LIMITED; FOITZIK, Richard Charles; MORROW, Benjamin Joseph; HEMLEY, Catherine Fae; LUNNISS, Gillian Elizabeth; CAMERINO, Michelle Ang; GANAME, Danny; STUPPLE, Paul Anthony; LESSENE, Romina; KERSTEN, Wilhelmus Johannes Antonius; HARVEY, Andrew John; HOLMES, Ian Peter; WO2014/26243; (2014); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 92933-47-6, name is 5-Isopropyl-1H-pyrazole-3-carboxylic acid, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 92933-47-6, COA of Formula: C7H10N2O2

Preparation 6 5-ISOPROPYL-1 H-PVRAZOLE-3-CARBOXYLIC acid ethyl ester 5-ISOPROPYL-1 H-PYRAZOLE-3-CARBOXYLIC acid (WO 03/035065, page. 485, example 17b) (1. 00G, 6. 49mmol) was dissolved in a mixture of concentrated sulphuric acid (1.5mL) and ethanol (25mL) and the reaction mixture heated at reflux for 3 hours. The reaction mixture was cooled, poured into water, basified with 0. 88 ammonia then extracted with ethyl acetate. The ethyl acetate was washed with brine, dried over magnesium sulphate and concentrated in vacuo to yield the title product, 514mg (43percent). 1HNMR (CDCI3, 400MHZ) : 1.30 (d, 6H), 1.38 (t, 3H), 3.64 (m, 1H), 4.38 (m, 2H), 6.63 (s, 1 H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Isopropyl-1H-pyrazole-3-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; PFIZER LIMITED; PFIZER INC.; WO2005/9965; (2005); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 345637-71-0, name is 2-(5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl)acetic acid, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 345637-71-0, Computed Properties of C7H7F3N2O2

A mixture of 5-[4-[5-(2,6-difluorophenyl)-4,5-dihydro-3-isoxazolyl]-2- thiazolyl]tetrahydro-2H-l,2-oxazine (i.e. the product of Step K) (0.235 g, 0.67 mmol), 5- methyl-3-(trifluoromethyl)-lH-pyrazole-l -acetic acid (0.154 g, 0.74 mmol) and N,N-dicyclohexylcarbodiimide (0.152 g, 0.74 mmol) in dichloromethane was stirred at room temperature for 20 h. The reaction mixture was diluted with more dichloromethane and the urea by-product was removed by filtration. The filtrate was concentrated under reduced pressure to a pale-yellow foam (0.42 g). The resulting foam was dissolved in a minimum amount of dichloromethane and loaded onto a chromatotron plate (2mm) eluting with a gradient of ethyl acetate in dichloromethane to give the title compound, a compound of the present invention, as a colourless foamy solid (0.101 g).in NMR (CDCI3): delta 2.05-2.20 (m, 1H), 2.20-2.35 (m, 4H), 3.403.55 (m, 1H), 3.55-3.70 (m, 2H), 3.75-3.88 (m, 1H), 4.08-4.20 (m, 1H), 4.35-4.45 (m, 1H), 4.45-4.55 (m, 1H), 5.08 (s, 2H), 6.02-6.12 (m, 1H), 6.30 (s, 1H), 6.85-6.98 (m, 2H), 7.25-7.38 (m, 1H), 7.72 (s, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl)acetic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; E. I. DU PONT DE NEMOURS AND COMPANY; LIEPA, Andris, Juris; PASTERIS, Robert, James; STEVENSON, Thomas, Martin; WO2011/85170; (2011); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 20055-01-0 as follows. Computed Properties of C4H10N4O4S

To a solution of (2S)-2- [ (BENZYLOXYCARBONYL) AMINO]-6- [ (TERT- butoxycarbonyl) amino] hexanoic acid (19.02 g) and triethylamine (5.56 g) in tetrahydrofuran (200 ml) was added methyl chloroformate (4.21 ml), followed by stirring under ice-cooling for 30 minutes. To the reaction mixture was added a solution of 1-METHYL-LH- pyrazole-4,5-diamine sulfate (15.75 g) and triethylamine (15.2 g) in water (50 ml) at the same temperature. The mixture was stirred at room temperature for 30 minutes. To the reaction mixture was added chloroform (300 ml), and the layers were separated. The organic layer was washed successively with 10% aqueous citric acid solution, brine and saturated aqueous sodium hydrogencarbonate solution. The organic layer was dried over anhydrous magnesium sulfate, filtered and concentrated in vacuo to give a crude product of 1- benzyl 5-tert-butyl (lS)- {l- [ (5-amino-l-methyl-lH- pyrazol-4-yl) CARBAMOYL] PENTAMETHYLENE} biscarbamate as an oil. The crude product was used directly in the next step without further purification. To a solution of the crude product of 1-benzyl 5- tert-butyl (LS)-{1-[(5-AMINO-1-METHYL-LH-PYRAZOL-4- yl) CARBAMOYL] PENTAMETHYLENE} BISCARBAMATE IN. methanol (350 ml) was treated with 10% palladium on carbon (2.0 g) under a hydrogen atmosphere at room temperature for 6 days. After the catalyst was filtered off, the filtrate was concentrated in vacuo. The residue was triturated with ethyl acetate and dried in vacuo to give tert-butyl (5S)-5-amino-6- [ (5-amino-l-methyl-lH-pyrazol-4- yl) amino] -6-oxohexylcarbamate (12.1 g) as a solid. H-NMR (DMSO-D6) 6 1. 24-1. 40 (4H, m), 1. 36 (9H, s), 1. 70- 1.77 (2H, m), 2.88-2. 91 (2H, m), 3.51 (3H, s), 3.80-3. 82 (1H, m), 5.15 (2H, s), 6.77 (1H, br), 7.27 (1H, s), 10.05 (1H, br)

According to the analysis of related databases, 20055-01-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; FUJISAWA PHARMACEUTICAL CO., LTD.; Wakunaga Pharmaceutical Co., Ltd.; WO2005/27909; (2005); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Synthetic Route of 5071-61-4, These common heterocyclic compound, 5071-61-4, name is 5-Phenyl-1H-pyrazole-3-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 2A: Synthesis of N-{4-[(4,6-dimethylpyrimidin-2-yl)({[2- (trimethylsilyl)ethoxy] methyl}) sulfamoyl]phenyl}-3-phenyl-lH-pyrazole-5-carboxamide, 10.2 [00292] HATU (294mg, 0.77 mmol) and DIPEA (0.27 ml, 1.55 mmol) were added at rt to a stirred solution of 4-amino-N-(4,6-dimethylpyrimidin-2-yl)-N-{[2- (trimethylsilyl)ethoxy]methyl}benzene-l-sulfonamide (10.1, 211 mg, 0.52 mmol) in DMF (dry, 15 ml) followed by 5 -phenyl- lH-pyrazole-3-carboxylic acid (97mg, 0.52 mmol). The resulting mixture was stirred at rt for 48h. The solvent was removed in vacuo and the remaining solid was purified by flash column chromatography (heptane/EtOAc 100/0 to 0/100) and triturated from DMSO:CH3CN:water 1 :2: 1 to obtain 63mg (18%) of N-{4-[(4,6-dimethylpyrimidin-2-yl)({[2- (trimethylsilyl)ethoxy]methyl} )sulfamoyl]phenyl } -3 -phenyl- 1 H-pyrazole-5 -carboxamide 10.2 as a pale yellow solid.

Statistics shows that 5-Phenyl-1H-pyrazole-3-carboxylic acid is playing an increasingly important role. we look forward to future research findings about 5071-61-4.

Reference:
Patent; RAZE THERAPEUTICS, INC.; SAIAH, Eddine; (148 pag.)WO2016/40449; (2016); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Electric Literature of 42098-25-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 42098-25-9, name is 5-Chloro-1-methyl-4-nitro-1H-pyrazole belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Step C. tert-Butyl [1-(1-methyl-4-nitro-1H-pyrazol-5-yl)azepan-4-yl]carbamate A mixture of 5-chloro-1-methyl-4-nitro-1H-pyrazole (0.400 g, 2.48 mmol), tert-butyl azepan-4-yl carbamate (0.58 g, 2.7 mmol), EtOH (3 mL) and DIPEA (1.6 mL, 9.2 mmol) was irradiated in a microwave oven for 1 h at 130 C. The mixture was concentrated under reduced pressure and the residue was purified by column chromatography on silica gel using CombiFlash apparatus, eluting with EtOAc/hexane (10-60%). The purification gave 0.580 g (69.0% yield) of the sub-title compound as a colorless oil. LCMS calc. for C11H18N5O4 (M+H-t-Bu+H)+: m/z=284.2. found: 284.1.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Chloro-1-methyl-4-nitro-1H-pyrazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; INCYTE CORPORATION; Li, Yun-Long; Burns, David M.; Feng, Hao; Huang, Taisheng; Mei, Song; Pan, Jun; Vechorkin, Oleg; Ye, Hai-Fen; Zhu, Wenyu; Rafalski, Maria; Wang, Anlai; Xue, Chu-Biao; US2015/57265; (2015); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics