Tag: M.W:100-200

Electric Literature of 26621-44-3, A common heterocyclic compound, 26621-44-3, name is 3-Nitro-1H-pyrazole, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Under inert gas (eg high purity nitrogen) protection to 10 mlSchlek reaction tube was added 0.02 mmol of water-soluble palladium on water-bound monophosphine salt compound (18), 1.0 mmol of 4-methoxy-2-chloropyridine, 1.5 mmol of 3-nitropyrazole, 3 mmol of potassium carbonate and 5 ml of Water, the reaction tube was replaced with nitrogen three times, and then heated to 100 C with an oil bath under magnetic stirring, and the reaction was refluxed for 24 hours. The oil bath was removed and the reaction was concentrated with a rotary evaporator. The residue was chromatographed on silica gel using ethyl acetate as the developing solvent to give pure product 4-methoxy-2-pyridine-3-nitroPyrazole in 85% yield.

The synthetic route of 26621-44-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Luoyang Normal College; Li Hongmei; Xu Chen; Tu Tianyong; Wang Zhiqiang; Hao Xinqi; (10 pag.)CN106674287; (2017); A;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 5334-40-7, name is 4-Nitro-1H-pyrazole-3-carboxylic acid, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 5334-40-7, HPLC of Formula: C4H3N3O4

A mixture of 4-nitro-3-pyrazolecarboxylic acid (4.98 g, 31.7 mmol), trans 4-aminocyclohexanol (3.65 g, 31.7 mmol), EDAC (6.68 g, 34.8 mmol) and HOBt (4.7 g, 34.8 mmol) in DMF (120 ml) was stirred at ambient temperature for 16 hours. The mixture was reduced in vacuo, the residue taken up in CH2CI2 and washed successively with 5percent citric acid, saturated aqueous sodium bicarbonate, water and brine. The product was found to be mainly in the citric acid wash, which was basified and extracted with EtOAc. The organic layer was dried over MgSO4, filtered and evaporated to give a white solid, which was triturated with CHCI3 to give 1.95 g of 4-nitro-1H-pyrazole-3-carboxylic acid 4-hydroxy-cyclohexylamide. (LC/MS: Rt 1.62, [M+H]+255).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Nitro-1H-pyrazole-3-carboxylic acid, and friends who are interested can also refer to it.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; WO2006/77428; (2006); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 5744-59-2, name is 1,5-Dimethyl-1H-pyrazole-3-carboxylic acid, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 5744-59-2, Formula: C6H8N2O2

a) Ethyl 5-(l ,5-dimethyl-lH-pyrazol-3-yl)-l ,2,4-oxadiazole-3-carboxylateEthyl aminohydroxyiminoacetate (3.78 mmol, 0.5 g), 1,5 -dimethyl- 1H- pyrazole-3-carboxylic acid (95 %, 3.78 mmol, 0.530 g) and 1,3-diisopropylcarbodi- imide (4.16 mmol, 0.525 g) were suspended in DCM (70 ml) under nitrogen atmosphere. The mixture was stirred at RT for a day. The solvent was evaporated and pyridine was added to the residue. The resulting mixture was refluxed for 6 h and stirred at RT overnight. Pyridine was evaporated and the residue diluted with DCM and water. The phases were separated and the water phase was extracted four times with DCM. The combined organics were washed with aqueous HC1 solution, saturated NaHC03, water and brine. The organic phase was dried, filtered and evaporated. The crude product was purified by flash chromatography. 0.285 g of the title compound was obtained. 1H-NMR (400 MHz, MeOH-c¾): delta 1.43 (t, 3H), 2.30 (s, 3H), 4.23 (s, 3H), 4.49 (q, 2H), 6.96 (s, 1H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1,5-Dimethyl-1H-pyrazole-3-carboxylic acid, and friends who are interested can also refer to it.

Reference:
Patent; ORION CORPORATION; TOeRMAeKANGAS, Olli; WOHLFAHRT, Gerd; SALO, Harri; RAMASUBRAMANIAN, Rathna, Durga; PATRA, Pranab, Kumar; MARTIN, Arputharaj, Ebenezer; HEIKKINEN, Terhi; VESALAINEN, Anniina; MOILANEN, Anu; KARJALAINEN, Arja; WO2012/143599; (2012); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 3994-50-1, name is 1-Methyl-4-nitro-1H-pyrazole, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3994-50-1, HPLC of Formula: C4H5N3O2

A mixture of a portion (0.7 g) of the material so obtained, platinum oxide (0.05 g), ethyl acetate (5 ml) and ethanol (15 ml) was stirred under 3 atmospheres pressure of hydrogen for 2 hours. The catalyst was removed by filtration and the filtrate was evaporated. There was thus obtained the required starting material (0.6 g); 1H NMR: (DMSOd6) 3.64 (s, 3H), 6.86 (s, IH), 6.97 (s, IH).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2006/40520; (2006); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

82560-12-1, name is 3-Amino-5-tert-butylpyrazole, belongs to pyrazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 82560-12-1

To a solution of 5-amino-3-tert-butylpyrazole (3.93 g, 28.2 mmol) in CH2Cl2 (140 mL) was added di-tert-butyl dicarbonate (6.22 g, 28.5 mmol) in one portion. The resulting solution was stirred at room temp. for 13 h, then diluted with EtOAc (500 mL). The organic layer was washed with water (2 x 300 mL), dried (MgSO4) and concentrated under reduced pressure. The solid residue was triturated (100 mL hexane) to give the desired carbamate (6.26 g, 92%): mp 63-64 C; TLC Rf (5% acetone/95% CH2Cl2); 1H-NMR (DMSO-d6) delta 1.15 (s, 9H), 1.54 (s, 9H), 5.22 (s, 1H), 6.11 (s, 2H); FAB-MS m/z ((M+H)+).

The synthetic route of 82560-12-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bayer Pharmaceuticals Corp.; EP1047418; (2005); B1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41680-34-6, name is 3-Amino-1H-pyrazole-4-carboxylic acid, A new synthetic method of this compound is introduced below., Application In Synthesis of 3-Amino-1H-pyrazole-4-carboxylic acid

A solution of 5-amino-1H-pyrazole-4-carboxylic acid (2000 mg, 15.74 mmol) and (E)-3- (dimethylamino)-2-methylacrylaldehyde (1780 mg, 15.74 mmol) in acetic acid (3 mL) and ethanol (1 mL) was heated at 70 oC for 1h. The resulting mixture was cooled to room temperature and the solid was collected by filtration, washed with water and dried in vacuum to afford 6-methylpyrazolo[1,5-a]pyrimidine-3-carboxylic acid (1610 mg, 58%) as a white solid. MS (ESI): m/z = 178.1 [M+1]+.

The synthetic route of 41680-34-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; BRYAN, Marian, C.; GOBBI, Alberto; KIEFER, James, Richard, Jr.; KOLESNIKOV, Aleksandr; OLIVERO, Alan, G.; DROBNICK, Joy; LIANG, Jun; RAJAPAKSA, Naomi; (846 pag.)WO2017/108723; (2017); A2;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 82560-12-1, name is 3-Amino-5-tert-butylpyrazole, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 82560-12-1, SDS of cas: 82560-12-1

To a solution of methyl-4-iodo-2-methoxybenzoate (10.0 g, 34.2 mmol) in toluene (90 mL) was added 3-tert-butyl-1H-pyrazol-5-amine (5.24 g, 37.7 mmol) followed by (1R,2R)-N1,N2-dimethylcyclohexane-1,2-diamine (870 mg, 1.08 mL, 6.85 mmol) and potassium carbonate (14.9 g, 108 mmol). The mixture was purged with N2, copper(I) iodide (326 mg, 1.71 mmol) was added and the reaction mixture was heated at reflux under N2 for 18 hr. The mixture was cooled to RT and was partitioned between EtOAc (100 mL) and water (3×150 mL). The organic layer was separated and washed with aq. citric acid solution (1% w/v, 150 mL) followed by water (150 mL), and was then dried and evaporated in vacuo. The residue was purified by flash column chromatography (SiO2, 330 g, EtOAc in isohexane, 0-100%, gradient elution) to afford methyl 4-(5-amino-3-tert-butyl-1H-pyrazol-1-yl)-2-methoxybenzoate as a buff coloured solid (3.62 g, 35%); Rt 1.93 min (Method 2); m/z 304 (M+H)+ (ES+).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; King-Underwood, John; Hardy, George; Murray, Peter John; Williams, Jonathan Gareth; Onions, Stuart Thomas; US2013/29990; (2013); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Synthetic Route of 175137-46-9, These common heterocyclic compound, 175137-46-9, name is 5-Cyclopropyl-1H-pyrazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2,4-difluoro-5-nitrobenzonitrile (Method 9, 5.0 g, 27 mmol) and DIEA (5.4 ml, 31 mmol) in THF (20 ml) was added dropwise the solution of 5-cyclopropyl- 1H-pyrazol-3-amine (3.2 g, 26 mmol) in THF (5 ml) at 0 C. After addition, the reaction mixture was stirred at 25 C for 1 hr. The solvent was removed under reduced pressure and the resulted residue was purified by column chromatography (hexane : EtOAc = 3 : 1) to give the title compound as a yellow solid (5.5 g, 74%). NMR (400 MHz) 12.54 (s, 1H), 10.13 (s, 1H), 8.78 (d, J= 7.2 Hz, 1H), 8.10 (d, J= 13.6 Hz, 1H), 6.02 (s, 1H), 1.91 (m, 1H), 0.97 (m, 2H), 0.72 (m, 2H). MS: Calcd. : 287; Found: [M+H]+ 288.

Statistics shows that 5-Cyclopropyl-1H-pyrazol-3-amine is playing an increasingly important role. we look forward to future research findings about 175137-46-9.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2005/103010; (2005); A2;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 33064-36-7, name is 1H-Pyrazole-3-carboxamide, A new synthetic method of this compound is introduced below., Application In Synthesis of 1H-Pyrazole-3-carboxamide

A mixture of feri-butyl 4-(10-bromo-2-oxo-l,2-dihydropyrimido[l,2-b]indazol-4-yl)piperidine-l- carboxylate (200 mg, 0.45 mmol), lH-pyrazole-3-carboxamide (124 mg, 1.12 mmol), tripotassium phosphate (133 mg, 0.63 mmol), [(2-di-ieri-butylphosphino-3,6-dimethoxy-2′,4′,6′-triisopropyl-l, – biphenyl)-2-(2 ‘-amino- l,l’-biphenyl)]palladium(II) methanesulfonate (= tBuBrettPhos Pd G3) (23 mg, 0.027 mmol), 2-(di-ieri-butylphosphino)-2′,4′,6′- triisopropyl-3,6-dimethoxy-l,l ‘-biphenyl (= tBuBrettPhos) (13 mg, 0.027 mmol) was added to a flask and flushed with argon before being suspended in 2 ml of ieri-butanol. Argon was bubbled for Imin more through the suspension, which was then stirred overnight at 110 C. After cooling to RT, the mixture was filtered and purified by preparative HPLC (gradient acetonitrile/water with 0.1 % trifluoroacetic acid). Evaporation of the combined product fractions yielded the title compound (119 mg, 56% of theory). LC-MS (Method 2): Rt = 2.73 min, MS (ESINeg): m/z = 476 [M-H]”

The synthetic route of 33064-36-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; ELLERMANN, Manuel; VALOT, Gaelle; CANCHO GRANDE, Yolanda; HASSFELD, Jorma; KINZEL, Tom; KOeBBERLING, Johannes; BEYER, Kristin; ROeHRIG, Susanne; SPERZEL, Michael; STAMPFUSS, Jan; MEYER, Imke; KOeLLNBERGER, Maria; BURKHARDT, Nils; SCHLEMMER, Karl-Heinz; STEGMANN, Christian; SCHUHMACHER, Joachim; WERNER, Matthias; (308 pag.)WO2016/173948; (2016); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 35691-93-1, name is Ethyl 3,5-dimethyl-1H-pyrazole-4-carboxylate, molecular formula is C8H12N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C8H12N2O2

A microwave vial was charged with ethyl 3,5-dimethyl-1 H-pyrazole-4-carboxylate (1.00 g, 5.95 mmol), methyl vinyl sulfone (0.521 ml, 5.95 mmol), K2CO3 (2.465 g, 17.84 mmol) and DMF (15 ml), and the mixture was irradiated for 30 minutes at 135 C in a personal microwave reactor. The reaction mixture was diluted with EtOAc, washed with brine and dried over magnesium sulfate. The solvent was removed to give ethyl 3,5-dimethyl-1-[2-(methylsulfonyl)ethyl]-1 H-pyrazole-4-carboxylate (1.61 g, 99 % yield). 1 H NMR (400 MHz, CHLOROFORM-d) delta ppm 4.47 (t, J=6.2 Hz, 2 H), 4.30 (q, J=IA Hz, 2 H), 3.65 (t, J=6.2 Hz, 2 H), 2.61 (s, 3 H), 2.60 (s, 3 H), 2.42 (s, 3 H), 1.37 (t, J=IA Hz, 3 H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 35691-93-1, its application will become more common.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/157273; (2008); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics