9/10/2021 News Analyzing the synthesis route of 1384973-12-9

The synthetic route of 1384973-12-9 has been constantly updated, and we look forward to future research findings.

1384973-12-9, name is 5-Amino-3-bromo-1H-pyrazole-4-carbonitrile, belongs to pyrazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Formula: C4H3BrN4

General procedure: A mixture of halide (1 .0 eq.), boronic acid or pinacol ester (1 .5 eq.) and potassium carbonate (2.0 eq.) in 1,4-dioxane and water (3:1, 0.1 M)was degassed by bubbling nitrogen through it for 15 mi 1,1- bis(diphenylphosphino)ferrocene-palladium(ll) dichloride dichloromethane complex (0.05 eq.) was added and the mixture was degassed again by bubbling nitrogen through it for 15 mm. The mixture was then heated under microwave irradiation at 120-140 C for 60-90 mm. The reaction mixture was either purified by SCX SPE cartridge and used as such or purified using the following procedure, unless stated used crude. The mixture was filtered through a pad of Celite. The cake was rinsed with DCM. Water was added to the filtrate and the layers were partitioned. The aqueous layer was extracted with DCM (x2). The combined organic extracts were filtered over phase separator and then concentrated under reduced pressure to give a dark solid. Further purification by flash column chromatography gave the desired compound.; General procedure D, 5-fluoro-N-[[2-fluoro-4-(4,4,5,5-tetramethyl-1 ,3,2-dioxaborolan-2- yl)phenyl]methyl]-2-methoxy-benzamide (1 .65 mmol) and 5-amino-3-bromo-1 H-pyrazole-4-carbonitrile (1.34 mmol) gave, after purification, titled compound (0.78 mmol). UPLC-MS (ES, Short acidic): 1.67 mi m/z 384.0 [M+H]

The synthetic route of 1384973-12-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; REDX PHARMA PLC; GUISOT, Nicolas; (266 pag.)WO2017/103611; (2017); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

9/10/2021 News The important role of 155377-19-8

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Ethyl 3-(trifluoromethyl)pyrazole-4-carboxylate, its application will become more common.

Related Products of 155377-19-8,Some common heterocyclic compound, 155377-19-8, name is Ethyl 3-(trifluoromethyl)pyrazole-4-carboxylate, molecular formula is C7H7F3N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of ethyl 3- {trifluoromethyl) -lH-pyrazole-4- carboxylate (0.208 g, 1.0 mmol) in DMF were added lH-indol-5- ylboronic acid (0.322 g, 2.00 mmol), Cu(OAc)2 (0.136 g, 0.75 rninol)/ and pyridine (0.162 ml, 2.00 mmol) and the mixture was stirred at room temperature for 3 days . The mixture was diluted with DCM and filtered through a pad of silica gel. The filtrate was concentrated in vacuo and the residue was purified by silica gel column chromatography (3:1 hexanes/EtOAc) to give ethyl 1- (lH-indol-5-yl) -3- (trifluoromethyl) -lH-pyrazole-4- carboxylate (0.313 g, 97%) as a solid: 1H NMR (CDCl3) delta 1.39 (t, 3H7 J = 7.0 Hz), 4.37 Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; WO2008/11131; (2008); A2;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

9/10/2021 News Simple exploration of 13745-17-0

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 13745-17-0, name is 4-Bromo-1H-pyrazole-3-carboxylic acid, A new synthetic method of this compound is introduced below., Formula: C4H3BrN2O2

Ste 2: (0585) Preparation of 4-bromo-N-(2,2-dimethoxyethyl)-1H-pyrazole-3-carboxamide: (0586) [00242] To a stirred solution of 4-bromo-1H-pyrazole-3-carboxylic acid (3.4 g, 17.8 mmol) in dichloromethane (100 mL) were added triethylamine (12.42 mL, 89.00 mmol) and 2,2-dimethoxyethanamine (2.9 mL, 26.70 mmol) at room temperature. The reaction mixture was cooled to 0 C and 1-propanephosphonic anhydride solution (T3P) (15.89 mL, 26.70 mmol, 50% in ethyl acetate) was added and the reaction mixture was stirred at room temperature for 16 h. The reaction mixture was diluted with water (200 mL) and extract with dichloromethane (3 x 100 mL). The combined organic layer was dried over anhydrous sodium sulfate, filtered and concentrated to afford the title compound 4-bromo-N-(2,2-dimethoxyethyl)-1H-pyrazole-3- carboxamide (3.6 g, crude) as a white solid. Calculated (M-H): 276.01; Found (M-H): 276.0.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; LUC THERAPEUTICS; ANDERSON, David, R.; VOLKMANN, Robert, A.; MENNITE, Frank, S.; FANGER, Christopher; (390 pag.)WO2017/100591; (2017); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

9/10/2021 News Continuously updated synthesis method about 162758-35-2

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-(4-Chlorophenyl)-1-(2,4-dichlorophenyl)-4-methylpyrazole-3-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Related Products of 162758-35-2, The chemical industry reduces the impact on the environment during synthesis 162758-35-2, name is 5-(4-Chlorophenyl)-1-(2,4-dichlorophenyl)-4-methylpyrazole-3-carboxylic acid, I believe this compound will play a more active role in future production and life.

Scheme 3 depicts the conversion of the carboxylic acid from Scheme 1 to its acid chloride using thionyl chloride or oxalyl chloride in dichloroethane at ambient to elevated temperatures followed by treatment with an amine such as alanine ethyl ester (A=methyl, n=0) in the presence of triethylamine to afford the amide ester (step a). Hydrolysis of the ester with lithium hydroxide in aqueous THF solution and acidification with dilute hydrochloric acid solution should yield the amide carboxylic acid (step b). This acid can be further treated with Boc anhydride (Boc2O) in THF in the presence of pyridine, followed by a solution of ammonia in THF at 0 degrees to ambient temperature to yield the carboxamido compound (step c).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-(4-Chlorophenyl)-1-(2,4-dichlorophenyl)-4-methylpyrazole-3-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; JENRIN DISCOVERY; US2007/213302; (2007); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

9/10/2021 News Analyzing the synthesis route of 27511-79-1

According to the analysis of related databases, 27511-79-1, the application of this compound in the production field has become more and more popular.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 27511-79-1, name is 3-Amino-1H-pyrazole-4-carboxamide sulfate(2:1), This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C8H14N8O6S

This embodiment relates to a process for synthesizing a pyrazolo [3,4-d] pyrimidine compound, which comprises the following steps:Step one, 15 g of 3-aminopyrazole-4-carboxamide hemisulfateAnd 150g of formamide (molar ratio of 1:10) was added to a 100mL three-necked round bottom flask, first with hydrochloric acid to adjust the pH to 2.6, and then warmed to 115 , and stirred at this temperature for 12h at room temperature, the reaction mixture First clear as a clear solution and then gradually precipitated a white solid, the reaction was cooled to room temperature after the reaction;Step two, the product obtained in step one was placed in the range of 7 12h,Let the product fully crystallized from formamide solution;Step three, the filter, the filtrate recovery applied, the resulting crystal crude beaker into the beater by mass than the crude product: purified water ratio of 1:14 by adding purified water, beating washing 3 hours;Step four, filtered again, the filtrate was discarded, the filter cake was washed with purified water until the eluate pH ? 6, after drying to obtain a white 4-hydroxypyrazolo [3,4-d] pyrimidine, the state is white Crystal powder, molar yield of 92.1%, purity of 99.8%

According to the analysis of related databases, 27511-79-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Shanghai Titan Technology Co., Ltd.; Xie Yingbo; Zhang Qing; Zhang Hua; Xu Xiaobing; Zhang Weiyan; Luo Guiyun; (6 pag.)CN104447758; (2017); B;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

10-Sep-21 News Some tips on 4149-06-8

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 4149-06-8, name is 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4149-06-8, Application In Synthesis of 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

10-Sep-21 News Share a compound : 5744-80-9

The synthetic route of 5744-80-9 has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5744-80-9, name is 3-Bromo-1,5-dimethyl-1H-pyrazole belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C5H7BrN2

The title compound was obtained in analogy to example 48, intermediate a, from tert-butyl 4- oxo- 1 -phenyl- 1,3 ,8-triazaspiro [4. 5]decane-8-carboxylate (example 35, intermediate c) and 3- bromo-1,5-dimethyl-1H-pyrazole (CAS RN 5744-80-9) at 120C over 19 hours as a colorlesssolid. MS (ESI): mlz = 426.25 [M+H]; To a suspension of tert-butyl 4-oxo- 1 -phenyl- 1,3, 8-triazaspiro [4.51 decane- 8-carboxylate (100 mg, 302 imol, example 35, intermediate c) and 1-ethyl-3-iodo-1H-pyrazole (67 mg, 302 imol, CAS RN 120278 1-34-7) in dioxane (2 mL) were added K2C03 (125 mg, 905 imol), DMEDA(6.11 iL, 48.3 imol, CAS RN 110-70-3) and Cul (4.6 mg, 24.1 imol) and the mixture was purged with argon. The suspension was heated to 100C and stuffed at this temperature over 14 hours. The reaction mixture was filtered over a microfilter, the filtrate was washed with a small volume of EtOAc and MeOH, treated with silica gel and evaporated. The compound was purified by silica gel chromatography on a 4 g column using an MPLC (ISCO) system elutingwith a gradient of n-heptane : EtOAc (100: 0 to 50: 50) to give the title compound as a colorless solid (0.107 g; 83.3%).

The synthetic route of 5744-80-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BUETTELMANN, Bernd; KOCER, Buelent; KUHN, Bernd; PRUNOTTO, Marco; RICHTER, Hans; RITTER, Martin; RUDOLPH, Markus; SATZ, Alexander Lee; (204 pag.)WO2017/5583; (2017); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

10-Sep-21 News Continuously updated synthesis method about 39806-90-1

The synthetic route of 4-Iodo-1-methyl-1H-pyrazole has been constantly updated, and we look forward to future research findings.

Application of 39806-90-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 39806-90-1, name is 4-Iodo-1-methyl-1H-pyrazole belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 4-Iodo-1-methyl-1H-pyrazole 1 (101 mg, 0.5 mmol) and phenylboronic 2 (59 mg, 0.5 mmol) were dissolved in DME (3 mL) and H2O (1.2 mL) in a microwave vial under a nitrogen atmosphere. Pd(PPh3)4 (2 mmol%, 11.6 mg) and Cs2CO3 (407.3 mg, 1.25 mmol) were added, and the reaction mixture was irradiated in a microwave apparatus at 90 C for 5-12 min. After the reaction mixture was cooled to ambient temperature, the product was concentrated, and the crude mixture was purified by silica gel column chromatography using petroleum ether/acetone as eluent to give the title compound.

The synthetic route of 4-Iodo-1-methyl-1H-pyrazole has been constantly updated, and we look forward to future research findings.

Reference:
Article; Cheng, Hua; Wu, Qiong-You; Han, Fan; Yang, Guang-Fu; Chinese Chemical Letters; vol. 25; 5; (2014); p. 705 – 709;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

10-Sep-2021 News Discovery of 78703-53-4

The synthetic route of 78703-53-4 has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 78703-53-4, name is 1,3-Dimethyl-1H-pyrazole-4-carboxylic acid, A new synthetic method of this compound is introduced below., Quality Control of 1,3-Dimethyl-1H-pyrazole-4-carboxylic acid

To a solution of 10b (578.8 g, 4.13 mol) in DMAC (2.0 L) at 0 C was added thionyl chloride (514.7 g, 4.33 mol) dropwise, maintaining the temperature below 15 C. After addition of DMAC (0.25 L), the mixture was stirred at 0-15 C for 0.5 h. To this mixture was added 8 (500.0 g, 3.93 mol) portionwise, maintaining the temperature below 40 C. After addition of DMAC (0.75 L), the mixture was stirred at 15-40 C for 1 h. Then, H2O (1.0 L), NaOH (346.1 g, 8.65 mol) in H2O (4.5 L), and H2O (3.5 L) were successively added dropwise at 15-40 C. The resulting slurry was stirred for 2 h, and then filtered. Wet solids were washed with H2O (1.5 L) and dried in vacuo at 50 C to give the title compound 13b (923 g, 94%) as a pale brown solid; mp 188-189 C; 1H NMR (500 MHz, DMSO-d6) delta 2.19 (s, 3H), 3.98 (s, 3H), 6.62 (ddd, 4JHF=3.3 Hz, J=8.5, 3.3 Hz, 1H), 6.83 (s, 1H), 7.02 (dd, 4JHF=6.5 Hz, J=3.0 Hz, 1H), 7.07 (dd, 3JHF=10.0 Hz, J=9.0 Hz, 1H), 9.48 (br s, 1H), 9.85 (s, 1H); 13C NMR (125 MHz, DMSO-d6) delta 13.0, 38.5, 107.5, 112.9, 112.9, 115.8 (2JCF=21.3 Hz), 125.0 (2JCF=12.5 Hz), 135.2, 145.4, 149.0 (1JCF=235.0 Hz), 153.3 (3JCF=1.3 Hz), 158.0; IR (ATR) 3229, 1651, 1625, 1547, 1531, 1504, 1452, 1377, 1303, 1274, 1260, 1226, 1178, 1109, 1056, 1024, 973, 893, 850, 817, 804, 788, 771, 746, 678, 638, 624, 595, 527, 510, 461, 451, 432, 422, 412 cm-1; Anal. Calcd for C12H12N3O2F: C, 57.83; H, 4.85; N, 16.86. Found: C, 57.62; H, 4.69; N, 16.88.

The synthetic route of 78703-53-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ishimoto, Kazuhisa; Sawai, Yasuhiro; Fukuda, Naohiro; Nagata, Toshiaki; Ikemoto, Tomomi; Tetrahedron; vol. 69; 40; (2013); p. 8564 – 8571;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

10-Sep-2021 News Application of 31230-17-8

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methyl-1H-pyrazol-3-amine, other downstream synthetic routes, hurry up and to see.

Electric Literature of 31230-17-8, The chemical industry reduces the impact on the environment during synthesis 31230-17-8, name is 5-Methyl-1H-pyrazol-3-amine, I believe this compound will play a more active role in future production and life.

4,6-dichloro-2- (phenylethynyl) – pyrimidine (0 ? 71 g, 2 · 85 mmol) Wasdissolved DMAC (4 mL) at successively added 3-amino-5-methyl-R than sit Jie (0.31 g, 3. 14 mmol), sodium iodide (0. 51 g, 3. 42 mmol) , DIPEA (0. 6 mL, 3. 42mmol), the mixture was heated to 90 ° overnight with stirring. Ethyl acetate(60 mL) and saturated sodium bicarbonate. The solution (60 mL) was added themixture was extracted, dried, concentrated and purified by column (methylenechloride / methanol (V / V) = 10/1), to give a pale yellow solid (0. 49 g,56percent).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methyl-1H-pyrazol-3-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GUANGDONG HEC PHARMACEUTICAL CO LTD; ZHANG, YINGJUN; LIU, BING; ZHANG, JIANCUN; ZHANG, JIQUAN; YANG, XUEQI; LI, YANPING; (45 pag.)CN104024246; (2016); B;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics