Month: September 2021

179692-08-1, name is Ethyl 4-iodo-1H-pyrazole-5-carboxylate, belongs to pyrazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Quality Control of Ethyl 4-iodo-1H-pyrazole-5-carboxylate

Example 15, Step C [00154] To a solution of compound 15c (38 g, 143 mmol) in acetonitrile (380 mL) at r.t. was added K2C03 (39.5 g, 286 mmol) and then PMBCI (24 mL, 177 mmol). The reaction mixture was stirred at 60C overnight. After cooling to r.t., the mixture was filtered and concentrated under reduced pressure. The residue was purified by chromatography on silica gel to afford compound 15d (32 g, 58%).[00155] This compound was characterized by proton NMR (1HNMR) and mass spectroscopy (MS) in accordance with the procedures described herein. Proton NMR yielded the following results: 1H NMR (DMSO-d6, 400MHz): delta 8.13(s, 1 H), 7.23(d, J = 8.8 Hz, 2H), 6.90(d, J = 8.8 Hz, 2H), 5.29(s, 2H), 4.24 (q, J = 6.8 Hz, 2H), 3.71 (s, 3H); 1.26(t, J = 6.8 Hz, 3H). Mass spectroscopy indicated MS (ESI): m/z 387 (M+H)+.

The synthetic route of 179692-08-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; ADDEX PHARMA SA; LIVERTON, Nigel, J.; BOLEA, Christelle; CELANIRE, Sylvain; LUO, Yunfu; WO2012/6760; (2012); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 139756-02-8, name is 4-Amino-1-methyl-3-N-propyl-1H-pyrazole-5-carboxamide, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 4-Amino-1-methyl-3-N-propyl-1H-pyrazole-5-carboxamide

Preparation of 4-[2-Propoxy Benzamido]-1-Methyl-3-Propyl-5-Carbamoyl Pyrazole To a solution of 25 g of 2-propoxy benzoic acid dissolved in dichloromethane, 66 g of thionyl chloride was added and stirred for 3 hours under reflux. After reaction was completed, the solvent and excessive thionyl chloride were distilled off under reduced pressure. To the residue was added 200 ml of dichloromethane (reaction solution 1). In another container, to 24 g of 1-methyl-3-propyl-4-amino-5-carbamoyl pyrazole in dichloromethane was added 13.4 g of triethylamine and 100 mg of dimethylaminopyridine and then cooled to 0 C., to which said reaction solution 1 was slowly added while maintaining the temperature of the solution at 0 C., and then stirred for 1 hour. The reaction mixture was successively washed with water, saturated aqueous sodium bicarbonate solution and brine. The organic layer was dried over anhydrous sodium sulfate and then filtered. The filtrate was concentrated under reduced pressure to obtain a crude product and then triturated with hexane to give 39 g of the title compound. 1H NMR (CDCl3): 0.91(t,3H), 1.05(t,3H), 1.62(m,2H), 1.89(m,2H), 2.52(t,2H), 4.06(s,3H), 4.18(t,2H), 5.57(br s,1H), 7.09(m,2H), 7.52(m,1H), 7.73(br s,1H), 8.26(dd,1H), 9.45(br s,1H)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 139756-02-8.

Reference:
Patent; Yoo, Moo-Hi; Kim, Won-Bae; Chang, Min-Sun; Kim, Soon-Hoe; Kim, Dong-Sung; Bae, Chul-Jun; Kim, Yong-Duck; Kim, Eun-Ha; US2003/176696; (2003); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 25711-30-2, name is 1,5-Dimethyl-1H-pyrazole-4-carbaldehyde, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 25711-30-2, Quality Control of 1,5-Dimethyl-1H-pyrazole-4-carbaldehyde

Example 17 N4-[(trans-4-{[(1,5-dimethyl-1H-pyrazol-4-yl)methyl]amino}cyclohexyl)methyl]-5-nitro-N2-[2-(trifluoromethoxy)benzyl]pyrimidine-2,4-diamine A mixture of N4-[(trans-4-aminocyclohexyl)methyl]-5-nitro-N2-[2-(trifluoromethoxy)benzyl]-pyrimidine-2,4-diamine (100 mg, 0.23 mmol) and 1,5-dimethyl-1H-pyrazole-4-carbaldehyde (23 mg, 0.19 mmol) in CH2Cl2 (15 mL) was stirred at room temperature for 1 h. NaBH(OAc)3 (200 mg, 0.95 mmol) was then added to the reaction mixture and stirred for another 16 h. The reaction mixture was diluted with 1M Na2CO3 to pH 9-10 and the organic phase was separated. The aqueous phase was extracted with CH2Cl2. The combined organic phase was dried over Na2SO4 and concentrated. The resulting residue was purified by silica gel prep TLC using 98:2 CH2Cl2:MeOH as an eluent to afford 54 mg (52%) of the title compound as a pale yellow foam, m/z 549.7 [M+1]+

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,5-Dimethyl-1H-pyrazole-4-carbaldehyde, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Boehringer Ingelheim Pharmaceuticals, Inc.; US2006/25433; (2006); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 852227-86-2, name is 5-(Chloromethyl)-1,3-dimethyl-1H-pyrazole, A new synthetic method of this compound is introduced below., Formula: C6H9ClN2

A solution of 7d (58 mg, 0.20 mmol, 1.0 equiv) in anhydrous DMF (0.8 mL) was treated with 60% sodium hydride (18 mg, 0.44 mmol, 2.2 equiv). After stirring at room temperature for 5 min, 5-(chloromethyl)-l,3-dimethyl-lH-pyrazole (63 mg, 0.42 mmol, 2.1 equiv) was introduced. Then the mixture was stirred at room temperature for 2 hours. The reaction was quenched with saturated aqueous NaHCO3. The resulting solution was extracted with ethyl acetate. The combined extracts were washed once with brine, dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by prep-TLC (ethyl acetate/dichloromethane/ methanol 10/10/1, 2 runs) to afford compound 30 (50 mg, 50%) as a white solid. MS 505 (MH)+, 503 (M-H)”. Purity 99% (HPLC).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SEQUOIA PHARMACEUTICALS, INC.; WO2009/105776; (2009); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 51516-70-2 as follows. Application In Synthesis of 5-Amino-1-(4-fluorophenyl)-1H-pyrazole-4-carbonitrile

General procedure: To a stirred solution of the intermediate compounds 1a-1d (1 mmol) and triethylamine (2 mmol) in DMF (12 mL) medium, a mixture of EDCI (1 mmol) and HOBt (1mmol) was added and the reaction mixture was stirred at room temperature for 30 min, then a mixture of compounds 2a-2d (1 mmol) and DMF (5 mL) was added, the reaction was stirred at room temperature. And the reaction progress was monitored by TLC. After completion of the reaction, the product was added into chloroform, then extracted from chloroform with water, and washed successively with 0.2 mol/L hydrochloric acid, water,2 mol/L sodium hydroxide, water, saturated sodium chloride, then dried, concentrated and purified by preparative thin layer chromatography (PE:EA = 8:1) followed by recrystallization from ethanol.

According to the analysis of related databases, 51516-70-2, the application of this compound in the production field has become more and more popular.

Reference:
Article; Xiao, Jin-Jing; Liao, Min; Chu, Ming-Jie; Ren, Zi-Li; Zhang, Xin; Lv, Xian-Hai; Cao, Hai-Qun; Molecules; vol. 20; 1; (2015); p. 807 – 821;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 1621-91-6, name is 1H-Pyrazole-3-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 1621-91-6

Dimethyl sulfate (236 g, 177 mL, 1.87 mol) was added dropwise over 45 min to a stirred solution of pyrazole-3-carboxylic acid (200 g, 1.78 mol) in 20% aqueous sodium hydroxide (850 mL) at 40 C. The reaction mixture was heated at 80 C for 2 h, cooled to room temperature, filtered, the filtrate acidified to pH 1 with concentrated HCI, the precipitate filtered, washed with water, and dried under vacuum to yield 1-methylpyrazole-5-carboxylic acid (85 g, 38%). The filtrate was concentrated in vacuo to 800 ML, extracted with chloroform (15X400 mL), the organic phase dried over anhydrous magnesium sulfate, concentrated in vacuo, and the residue recrystallized from isopropanol to yield 1-METHYLPYRAZOLE-3-CARBOXYLIC acid (74 g) as a white crystalline solid.

The synthetic route of 1H-Pyrazole-3-carboxylic acid has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK & CO., INC.; WO2004/58702; (2004); A2;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 500011-84-7 as follows. category: pyrazoles-derivatives

To trifluoroacetic acid (70 mL) was slowly added [3-BROMO N, N DIMETHYL-1H] [PYRAZOLE-L-SULFONAMIDE] (i. e. the bromopyrazole product of Step B) (57.04 g). The reaction mixture was stirred at room temperature for 30 minutes and then concentrated at reduced pressure. The residue was taken up in hexane, insoluble solids were filtered off, and the hexane was evaporated to afford the crude product as an oil. The crude product was further purified by chromatography on silica gel using ethyl acetate/dichloromethane (10: 90) as eluent to afford an oil. The oil was taken up in dichloromethane, neutralized with aqueous sodium bicarbonate solution, extracted with dichloromethane [(3X),] dried over magnesium sulfate and concentrated to afford the title product as a white solid (25.9 g), m. p. [61-64 C.] 1H NMR (CDC13) 8 6.37 (d, 1H), 7.59 (d, 1H), 12.4 (br s, 1H).

According to the analysis of related databases, 500011-84-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; E.I. DU PONT DE NEMOURS AND COMPANY; WO2004/11447; (2004); A2;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Reference of 92525-10-5, The chemical industry reduces the impact on the environment during synthesis 92525-10-5, name is 3-Iodo-1-methyl-1H-pyrazole, I believe this compound will play a more active role in future production and life.

Step 1-Synthesis of 2-(1-methyl-1H-pyrazol-3-yl)-4-(trimethylsilyl)but-3-yn-2-ol To a solution of 3-iodo-1-methyl-1H-pyrazole (378 mg, 1.82 mmol) in dry DCM (15 mL) at 0 C. under an atmosphere of nitrogen, was introduced ethylmagnesium bromide (2.0 mL of a 1.0M solution in THF, 2.0 mmol). After 30 minutes at 0 C., the reaction mixture was warmed to RT for 15 minutes, then introduced to a solution of 4-(trimethylsilyl)but-3-yn-2-one (0.37 ml, 2.18 mmol) in dry DCM (5 ml) at 0 C. under an atmosphere of nitrogen. The reaction mixture was warmed to RT for 16 hr. Following addition of saturated aqueous ammonium chloride (5 ml), the reaction mixture was extracted with DCM (3*5 mL extractions). The combined organic extracts were dried (Na2SO4), filtered and concentrated in vacuo. Purification of the residue by silica gel flash column chromatography (heptane/EtOAc gradient) furnished the title compound as an orange-brown oil: 1H NMR (500 MHz, CDCl3) delta 0.15 (9H, d, J=3.5 Hz), 1.82 (3H, s), 3.18 (1H, s), 3.86 (3H, s), 6.28 (1H, d, J=2.2 Hz), 7.26 (1H, d, J=2.2 Hz); LC-MS: m/z=+222.95 (M+H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Iodo-1-methyl-1H-pyrazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Genentech, Inc.; US2012/214762; (2012); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 69843-13-6, name is 1-Methyl-1H-pyrazol-4-amine, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 69843-13-6, name: 1-Methyl-1H-pyrazol-4-amine

Step 4: Preparation of tert-butyl {3-[(5-cyano-2-[(1-methyl-1H-pyrazol-4-yl)amino]-7-{[2-(trimethylsilyl)ethoxy]methyl}-7H-pyrrolo[2,3-d]pyrimidin-4-yl)oxy]cyclobutyl}carbamate To a microwave reaction vial was added tert-butyl {3-[(2-chloro-5-cyano-7-{[2-(trimethylsilyl)ethoxy]methyl}-7H-pyrrolo[2,3-d]pyrimidin-4-yl)oxy]cyclobutyl}carbamate (508 mg, 1.0 mmol), 1-methyl-1H-pyrazol-4-amine (110 mg, 1.1 mmol), 1,4-dioxane (10 mL), Cs2CO3 (670 mg, 2.1 mmol, 2 mol eq), Xantphos (62 mg, 0.1 mmol) and Pd2(dba)3 (94 mg, 0.1 mmol). The reaction vial was flushed with nitrogen, capped, stirred and heated to 140 C. in a Biotage microwave reactor for 1 hr and 45 min. The reaction was diluted with EtOAc (120 mL) and water (20 mL). The organic layer was separated, washed with water (20 mL), brine (10 mL), and dried over Na2SO4. After concentrating the extract to dryness, the product was purified via flash chromatography eluting with a gradient of 0%-60% EtOAc in heptanes to afford the title compound (480 mg, 84 yield) as a light yellow solid. 1:1 cis:trans mixture: 1H NMR (400 MHz, DMSO-d6) delta ppm 9.42 (s, 1H) 8.11 (s, 1H) 7.96 (br. s., 1H) 7.49-7.60 (m, 1H) 7.20-7.46 (m, 1H) 5.53 (br. s., 2H) 4.11-5.13 (m, 1H) 3.82 (s, 3H) 3.56 (t, J=7.55 Hz, 2H) 2.83 (d, J=6.80 Hz, 1H) 2.39-2.48 (m, 2H) 2.02-2.16 (m, 1H) 1.39 (d, J=5.54 Hz, 9H) 0.84 (t, J=8.06 Hz, 2H) -0.12 (br. s., 9H). m/z (APCI+) for C26H38N8O4Si 555.1 (M+H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methyl-1H-pyrazol-4-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; PFIZER INC.; Cheng, Hengmiao; Johnson, JR., Theodore Otto; Kath, John Charles; Liu, Kevin Kun-Chin; Lunney, Elizabeth Ann; Nagata, Asako; Nair, Sajiv Krishnan; Planken, Simon Paul; Sutton, Scott Channing; US2013/79324; (2013); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 37687-24-4, name is Diethyl 3,5-pyrazoledicarboxylate, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 37687-24-4, Recommanded Product: 37687-24-4

In 250 mL of acetonitrile was dissolved 2-chloro-1-(i-methyl-1H- pyrazol-4-yl)ethanone (18.3 g, 115 mmol) and diethyl iH-pyrazole-3,5-dicarboxylate (24.5 g, 115 mmol) before finely ground K2C03 (31.9 g, 231 mmol) was added in one portion. The reaction mixture was stirred at ambient temperature overnight. The reaction mixture was filtered and the cake was washed with acetonitrile (100 mL). The filtrate was concentrated in vacuo to a thick oil. The oil was dissolved in EtOAc (80 mL), and heptane (200 mL) was added slowly with stirring. The resultant solids were stirred for 2 hours, then filtered and washed with heptane. The solids were dried in a vacuum oven to afford diethyl 1-(2-(i-methyl-1H-pyrazol-4- yl)-2-oxoethyl)-1H-pyrazole-3,5-dicarboxylate (26.4 g, 77.4 mmol, 67.1 % yield).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Diethyl 3,5-pyrazoledicarboxylate, and friends who are interested can also refer to it.

Reference:
Patent; ARRAY BIOPHARMA INC.; CELGENE CORPORATION; ALLEN, Shelley; BOYS, Mark Laurence; CHICARELLI, Mark J.; FELL, Jay Bradford; FISCHER, John P.; GAUDINO, John; HICKEN, Erik James; HINKLIN, Ronald Jay; KRASER, Christopher F.; LAIRD, Ellen; ROBINSON, John E.; TANG, Tony P.; BURGESS, Laurence E.; RIEGER, Robert Andrew; PHENEGER, Jed; SATOH, Yoshitaka; LEFTHERIS, Katerina; RAHEJA, Raj K.; BENNETT, Brydon L.; (223 pag.)WO2016/90285; (2016); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics