Day: June 10, 2021

Related Products of 15802-75-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 15802-75-2, name is 4-Iodo-3-methyl-1H-pyrazole belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Under nitrogen protection,To a 10 ml Schlek reaction tube (a glass instrument commonly used in anhydrous oxygenless operation) was added 1.0 mmolBromo-5- (4- (6-bromopyridyl-3) phenyl) pyridine, 2.2 mmol3-methyl-4-iodopyrazole,0.03 mmol of palladium acetate, 0.05 mmol of di-t-butyl (2 ‘, 4′, 6′-triisopropyl-3,6-dimethoxybiphenyl-2-yl) phosphine, 6.0 mmol of sodium tert-butoxide ,And 5 ml of toluene,The reaction tube was purged with nitrogen three times,And then heated to 110 C with an oil bath under magnetic stirring, and the reaction was refluxed for 24 hours. Down to room temperatureThe reaction solution was further added, 4.0 mmol of 4-carboxyphenylboronic acid, 0.03 mmol of palladium acetate,0.06 mmol 2′-dicyclohexylphosphino-2,6-di-I-propyl-4-sulfonate-1,1’-biphenyl sodium,8.0 mmol of potassium carbonate, and 100 mmol of water; and then heated to 100 C with an oil bath under magnetic stirring,The reaction was refluxed for 40 hours. Down to room temperature; add 20 ml of water, filtration, with concentrated hydrochloric acid to adjust the pH of the filtrate to 1,After stirring at room temperature for 3 h, the mixture was filtered, washed with ethanol and dried to obtain product 21, yield 77%.The mass spectrum (ESI) data for this product (C38H28N6O4) was 632.26.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Iodo-3-methyl-1H-pyrazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Luoyang Normal College; Li Hongmei; Xu Chen; Wang Zhiqiang; Tu Tianyong; Hao Xinqi; (10 pag.)CN106674208; (2017); A;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 118430-74-3, name is 3-Cyclopropyl-1-methyl-1H-pyrazol-5-amine belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 3-Cyclopropyl-1-methyl-1H-pyrazol-5-amine

Example 161 Synthesis of N4-(3-cyclopropyl-1-methyl-1H-pyrazol-5-yl)-7-(3,5-dimethylisoxazol-4-yl)-6-methoxy-9H-pyrimido[4,5-b]indole-2,4-diamine (Cpd. No. 206) Pd2(dba)3 (18 mg) and BINAP (26 mg) were mixed in anhydrous toluene. And the mixture was heated at reflux for 3-4 minutes. This mixture was transferred into a round-bottom flask containing ZBB253 (60 mg), 3-cyclopropyl-1-methyl-1H-pyrazol-5-amine (84 mg), K3PO4 (130 mg), and toluene (2 mL). The mixture was heated at reflux for overnight before quenching with methanol. The reaction mixture was filtered and the mixture was purified by HPLC to yield Cpd. No. 206 as a CF3CO2H salt in 15 mg. ESI-MS calculated for C23H25N8O2 [M+H]+=445.21; Observed: 445.54. 1H NMR (300 MHz, MeOD) delta 7.70 (s, 1H), 7.35 (s, 1H), 6.09 (s, 1H), 3.92 (s, 3H), 3.74 (s, 3H), 2.33 (s, 3H), 2.16 (s, 3H), 1.98-1.88 (m, 1H), 1.03-0.93 (m, 2H), 0.78-0.71 (m, 2H).

The synthetic route of 118430-74-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF MICHIGAN; Wang, Shaomeng; Zhao, Yujun; Zhou, Bing; Aguilar, Angelo; Liu, Liu; Bai, Longchuan; McEachern, Donna; Sun, Duxin; Wen, Bo; Luo, Ruijuan; Zhao, Ting; Chinnaiyan, Arul; Asangani, Irfan A.; Stuckey, Jeanne; Meagher, Jennifer Lynn; Ran, Xu; US2015/246923; (2015); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 4054-67-5, name is 3,3′,5,5′-Tetramethyl-1H,1’H-4,4′-bipyrazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 3,3′,5,5′-Tetramethyl-1H,1’H-4,4′-bipyrazole

General procedure: A mixture of H2L (0.15 mmol, 0.057 g), phen (0.25 mmol, 0.050 g), Zn(Ac)2·2H2O (0.40 mmol, 0.088 g) and 12 mL H2O was placed in a 25 mL Teflon-lined stainless steel container, heated to 180 C for 72 h,and then cooled to room temperature at a rate of 5 C/h.

The synthetic route of 3,3′,5,5′-Tetramethyl-1H,1’H-4,4′-bipyrazole has been constantly updated, and we look forward to future research findings.

Reference:
Article; Wang, Jun; Bai, Chao; Hu, Huai-Ming; Yuan, Fei; Xue, Gang-Lin; Journal of Solid State Chemistry; vol. 249; (2017); p. 87 – 97;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 16078-71-0, name is Ethyl 5-amino-1-phenyl-1H-pyrazole-4-carboxylate, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16078-71-0, Recommanded Product: 16078-71-0

A mixture of 1.50 g (6 mmol) of ethyl 5-amine-1-phenyl-1Hpyrazole-4-carboxylate (13) and 20 mL of 85% phosphoric acidwas maintained under reflux and stirring for 6 h at 170 C. Aftercompletion of the reaction, 50 mL of crushed ice was added, andthen the mixture was basified to pH 7 with NaOH (6 M aq). Themixture was extracted with dichloromethane (3 30 mL). Thecombined organic solution was washed with water (3 50 mL),dried (anhydrous sodium sulfate), filtered, and concentrated undervacuum to afford 14 as a brown oil.Yield: 86%. IR (KBr. cm1): 3418-3182; 1618; 1597; 1550;760-694. 1H NMR (400 MHz, CDCl3, TMS, d in ppm): 3.84 (s, 2H,NH2); 5.61 (d, 1H, J = 2.0 Hz, H4); 7.42 (d, 1H, J = 1.8 Hz, H3);7.57-7.32 (m, 5H, H20, H30, H40, H50, H60). 13C NMR (100 MHz,CDCl3, TMS, d in ppm): 90.6; 123.9; 127.4; 129.4; 138.6; 140.3;144.7. EI [M1] 157.8.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 5-amino-1-phenyl-1H-pyrazole-4-carboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Silva, Thais B.; Bernardino, Alice M.R.; Ferreira, Maria de Lourdes G.; Rogerio, Kamilla R.; Carvalho, Leonardo J.M.; Boechat, Nubia; Pinheiro, Luiz C.S.; Bioorganic and Medicinal Chemistry; vol. 24; 18; (2016); p. 4492 – 4498;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Related Products of 5203-77-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 5203-77-0 name is 1,3-Dimethyl-1H-pyrazol-5-ol, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: To a flame-dried Schlenk tube was added electron-rich aromatic (0.5mmol), CF3SO2Na (118mg, 0.7mmol) dry 1,4-dioxane or CH3CN (1mL). The mixture was heated to 60C by a preheated oil bath. PhPCl2 (125mg, 0.7 mmoL) was added. The reaction mixture was stirred at 70C for the indicated time. Then the reaction mixture was cooled to room temperature. The solvent was evaporated under reduced pressure and the residue was purified by silica gel column chromatography to afford the pure product.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1,3-Dimethyl-1H-pyrazol-5-ol, and friends who are interested can also refer to it.

Reference:
Article; Zhao, Xia; Zheng, Xiancai; Tian, Miaomiao; Sheng, Jianqiao; Tong, Yifan; Lu, Kui; Tetrahedron; vol. 73; 51; (2017); p. 7233 – 7238;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1904-31-0, name is 1-Methyl-1H-pyrazol-3-amine, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1904-31-0, name: 1-Methyl-1H-pyrazol-3-amine

(E)-Cyclopentyloxyimino-(3,4-dichloro-phenyl)-acetic acid (100 mg, 0.33 mmol) was dissolved in methylene chloride (1.6 mL). N,N-diisopropylethylamine (173 muL, 0.99 mmol) and 1-methyl-1H-pyrazol-3-ylamine (32 muL, 0.33 mmol) were added and the reaction mixture was cooled to 0° C. O-(7-Azabenzotriazole-1-yl)-N,N,N’N’-tetramethyluronium hexafluorophosphate (126 mg, 0.33 mmol) was added and the reaction mixture was allowed to warm to 25° C. After stirring 16 h, the reaction mixture was diluted with chloroform (2 mL) and washed with saturated aqueous sodium bicarbonate solution (1.5 mL). The aqueous phase was extracted with chloroform (1.5 mL) and the combined organic phases were filtered through sodium sulfate and evaporated in vacuo. The residue was purified by flash column chromatography (Merck silica gel 60, 40-63 mum; 40percent ethyl acetate/hexanes) to afford (E)-2-cyclopentyloxyimino-2-(3,4-dichloro-phenyl)-N-(1-methyl-1H-pyrazol-3-yl)-acetamide (103 mg, 82percent) as a white solid after lyophilization from aqueous dioxane: LC-MS (ESI) m/e calcd for C17H18Cl2N4O2 [M+] 380.08, found 381 [M+H+]; H1-NMR (400 MHz, CDCl3) .box. ppm 1.64 (m, 4 H, 2*CH2), 1.85 (m, 4 H, 2*CH2), 3.83 (s, 3 H, NCH3), 4.84 (m, 1 H, OCH), 6.70 (d, J=2.3 Hz, 1 H, Ar), 7.26 (d, J=2.3 Hz, 1 H, Ar), 7.33 (dd, Jo=8.3, Jm=1.9 Hz, 1 H, Ar), 7.47 (d, Jo=8.3 Hz, 1 H, Ar), 7.61 (d, Jm=1.9 Hz, 1 H, Ar), 9.15 (s, 1 H, NH).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methyl-1H-pyrazol-3-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Berthel, Steven Joseph; Kester, Robert Francis; Murphy, Douglas Eric; Prins, Thomas Jay; Ruebsam, Frank; Tran, Chinh Viet; Vourloumis, Dionisios; US2008/146625; (2008); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 15878-00-9, name is 4-Chloro-1H-pyrazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 4-Chloro-1H-pyrazole

2-Amino-4-(4-chloro-pyrazol-1-yl)-6-methylsulfanyl-pyrimidine-5-carbonitrile From 2-amino-4-bromo-6-methylsulfanyl-pyrimidine-5-carbonitrile, 4-chloropyrazole and cesium carbonate in NMP. EI-MS m/e (%): 269 (M{37Cl}+H+, 30). 267 (M{35Cl}+H+, 100).

The synthetic route of 4-Chloro-1H-pyrazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Borroni, Edilio Maurizio; Huber-Trottmann, Gerda; Kilpatrick, Gavin John; Norcross, Roger David; US2001/27196; (2001); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 3469-69-0, name is 4-Iodopyrazole, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3469-69-0, COA of Formula: C3H3IN2

To a mixture of 4-iodo-1H-pyrazole (2.91 g, 15 mmol), Pd(PPh3)2C12 (1 g, 1.5 mmol), CuT (286 mg, 1.5 mmol) and Et3N (6 mL) in EtOH (20 mL) was added trimethylsilylacetylene (3.2 mL, 22.5 mmol). The reaction was stirred at 70C for 4 h, then cooled to rt and concentratedvacuo. The residue was diluted with EtOAc (20 mL) and the undissolved solid was removed by filtration. The filtrate was dried over Na2504 and concentrated in vacuo. The residue was purified by a silica gel column chromatography (PE/EtOAc (v/v) = 5/1) to give the title compound as a white solid (1.3 g, 53%).LC-MS (ESI, pos. ion) m/z: 165 [M + H]1H NMR (400 MHz, CDC13) 5 (ppm): 0.24 (s, 9H), 7.76 (s, 2H), 11.43 (br, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Iodopyrazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; XI, Ning; SUNSHINE LAKE PHARMA CO., LTD.; YIN, Lihua; LI, Xiaobo; YU, Na; WU, Yanjun; WO2013/177092; (2013); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Reference of 1254717-53-7, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1254717-53-7 name is (5-(Trifluoromethyl)-1H-pyrazol-3-yl)methanamine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

(3-(Trifluoromethyl)-1 H-pyrazol-5-yl)methanamine (0.7 g, 4.2 mmol, 1 eq) was charged in dichloromethane (70 ml) at room temperature, then to that TEA (.42g, 4.2 mmol, 1eq ) was added at room temperature and stirred for 10 min and cooled to 0-5C. (Boc)20 (0.92 g, 4.2 mmol, 1 eq) was added drop wise to reaction mixture for 30 min and maintained for 3 h at 0-5C. Progress of the reaction was monitored by the TLC (30 % Ethyl acetate/Hexane). On completion of the reaction, dichloromethane was distilled, the residue obtained was treated water (50 ml) and extracted with ethyl acetate (100 ml). The combined organic layer was dried over sodium sulphate, distilled the solvent under vacuum. The obtained crude was purified with column chromatography to yield the required product as a white colored solid (0.5 g, 44 % yield).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (5-(Trifluoromethyl)-1H-pyrazol-3-yl)methanamine, and friends who are interested can also refer to it.

Reference:
Patent; GRUeNENTHAL GMBH; FRANK, Robert; CHRISTOPH, Thomas; LESCH, Bernhard; LEE, Jeewoo; WO2012/62462; (2012); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 17635-45-9, name is 4-Pyrazol-1-yl-phenylamine, This compound has unique chemical properties. The synthetic route is as follows., Safety of 4-Pyrazol-1-yl-phenylamine

General procedure: A mixture of aniline derivative 1a?1e (1 mmol) and 1 cm3concentrated hydrochloric acid was thoroughly stirred atroom temperature for 15 min and then cooled to 0 C. Asolution containing 0.069 g sodium nitrite (1 mmol) in 10 cm3 water was added dropwise to the initial mixtureduring 40 min. An aqueous solution of aromatic nucleophile(1 mmol) in NaOH 10percent (5 cm3) was then addedand the resulted mixture was stirred for 1 h at 0 C. Theprecipitated solid was filtered, washed with water and dried in air. The products 2a?2c, 2e, 2f, 2m, and 2o were purifiedby recrystallization in ethanol, but preparative TLC (nhexane?EtOAc, 4:1) was applied for purification of products2d, 2g?2l, 2n, and 2p.

According to the analysis of related databases, 17635-45-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Ghasemi, Zarrin; Azizi, Sajjad; Salehi, Roya; Kafil, Hossein Samadi; Monatshefte fur Chemie; vol. 149; 1; (2018); p. 149 – 157;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics