Research on new synthetic routes about 660845-30-7

The synthetic route of 5-Chloro-3-(difluoromethyl)-1-methyl-1H-pyrazole-4-carbaldehyde has been constantly updated, and we look forward to future research findings.

Reference of 660845-30-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 660845-30-7, name is 5-Chloro-3-(difluoromethyl)-1-methyl-1H-pyrazole-4-carbaldehyde belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

In a 500 mL round-bottom flask, 6.0 g (31 mmol) of 5-chloro-3-(difluoromethyl)-1 -methyl-1 H- pyrazole-4-carbaldehyde were taken up in 30 mL of toluene. A solution of 2.4 g (62 mmol) of sodium hydroxide in 6 mL of water was added to the reaction mixture, followed by 103 mL of a 30% strength solution of hydrogen peroxide in water. During the addition, the temperature was kept below 37 C. The reaction mixture was then stirred at 50 C for 7 h. After cooling, the organic phase was extracted with 100 mL of water. The aqueous phase was acidified to pH 2 using dilute hydrochloric acid. The white precipitate formed was filtered off, washed twice with 20 mL of water and dried. This gave 3.2 g of 5-chloro-3-(difluoromethyl)-1 -methyl-1 H-pyrazole-4-carboxylic acid as a white solid. H NMR (400 MHz, DMSO-c/6) delta ppm : 3.78 (s, 3H); 7.12 (t, 1 H, JHF = 53.60 Hz); 13.19 (s, 1 H); IR (KBr): 1688 cm”1 (C=0); 2200-3200 cm”1 broad;

The synthetic route of 5-Chloro-3-(difluoromethyl)-1-methyl-1H-pyrazole-4-carbaldehyde has been constantly updated, and we look forward to future research findings.

Brief introduction of 660845-30-7

The synthetic route of 660845-30-7 has been constantly updated, and we look forward to future research findings.

660845-30-7, name is 5-Chloro-3-(difluoromethyl)-1-methyl-1H-pyrazole-4-carbaldehyde, belongs to pyrazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 660845-30-7

Step 1 : preparation of of 5-chloro-3-(difluoromethyl)-1-methyl-1 H-pyrazole-4-carboxylic acid (Ilia)In a 500 ml flask, 6.0 g (31 mmol) of 5-chloro-3-(difluoromethyl)-1-methyl-1 H-pyrazole-4-carbaldehyde are added to 30 ml of toluene. A solution of 2.4 g (62 mmol) of sodium hydroxide in 6ml of water is added to the reaction mixture, followed by 103 ml of a 30% solution of hydrogen peroxide in water, whilst keeping the temperature below 37C. After the end of the addition, the reaction mixture is stirred at 50C for 7 hours. Once the reaction mixture is back to room temperature, the two phases are separated and the organic phase is extracted with 100 ml of water. The combined aqueous phases are acidified to pH 2 with aqueous hydrochloric acid. The resulting white precipitate is filtered, washed twice with 20 ml of water, and dried to yield 3.2 g of 5-chloro-3-(difluoromethyl)-1-methyl-1 H-pyrazole-4-carboxylic acid as a white solid. H NMR (400 MHz, DMSO-c/6) delta ppm : 3.78 (s, 3H); 7.12 (t, 1 H, JHF = 53.60 Hz)13.19 (s, 1 H); IR (KBr) : 1688 cm”1 (C=0); 2200-3200 cm”1 broad (hydrogen bond).

The synthetic route of 660845-30-7 has been constantly updated, and we look forward to future research findings.

Some tips on 660845-30-7

The synthetic route of 660845-30-7 has been constantly updated, and we look forward to future research findings.

660845-30-7, name is 5-Chloro-3-(difluoromethyl)-1-methyl-1H-pyrazole-4-carbaldehyde, belongs to pyrazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Formula: C6H5ClF2N2O

In 1000 mL reaction flask, 38.9g 3- difluoromethyl-1-methyl-5-chloro-4-carbaldehyde and 390ml of water, 8.4g of sodium hydroxide was added, followed by stirring, 1g of nano copper oxide, control of the reaction temperature is 25-30 C, air through an oxidation reaction 15 hours, starting material HPLC i.e.3- difluoromethyl-1-methyl-5-chloro-4-carbaldehyde , less than the total amount of an amount of 0.2%; the reaction was stopped by filtration, recovery of copper catalyst. The reaction mixture was cooled to below 10 C, add 31% hydrochloric acid to a pH of 1-2, the precipitated solid was filtered; the solid was washed with a small amount of water; and dried to give the product 3-methyl-5-fluoro-1- chloro-pyrazole-4-carboxylic acid 40g, HPLC content 99%; LC-MS: m / e = 210.

The synthetic route of 660845-30-7 has been constantly updated, and we look forward to future research findings.