Category: 930-36-9

Reference of 930-36-9,Some common heterocyclic compound, 930-36-9, name is 1-Methylpyrazole, molecular formula is C4H6N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

S1, under nitrogen atmosphere protection,100g of 1-methylpyrazole was added to 2L of tetrahydrofuran, stirred to dissolve to uniform state,Then cooled to minus 60 degrees,Then 2.5M concentration of n-butyllithium 600ml,Insulation below minus 60 degrees Celsius,After the addition of n-butyl lithium is completed, and then incubated 0.4h,Cooled to minus 65 degrees Celsius,100 mL of N, N-dimethylformamide was added dropwise,After dropping N, N-dimethylformamide overnight at room temperature,The whole was cooled to 0 degrees Celsius, 300ml deionized water was added dropwise after quenching.S2, extracted with 500 ml of ethyl acetate each time,Repeat 2 times to separate the organic phase,Each time with 500ml saturated brine wash,Repeat washing 2 times, with 50g anhydrous sodium sulfate drying 1h,Suction filtration, then decompression rotary steaming,The product from S2 step is 1-methyl-1H-pyrazole-5-carbaldehyde.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Methylpyrazole, its application will become more common.

Reference:
Patent; Beijing Luhe Ningyuan Technology Co., Ltd.; Jiang Yongjun; Xing Lixin; Liu Bo; (11 pag.)CN106928143; (2017); A;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 930-36-9 as follows. HPLC of Formula: C4H6N2

To a stirred solution of 1-methyl-1H-pyrazole (609 mmol) in dry ether (600 mL) under an atmosphere of nitrogen was added a solution of n-BuLi in hexane (2.6M, 670 mmol) dropwise at -78oC over a period of 1 h. The reaction mixture was stirred at this temperature for a further 1 hour, and then dry carbon dioxide gas was passed through the mixture at -78oC for 30 min. The reaction mixture was then allowed to warm to room temperature and quenched with water (500 mL). The aqueous phase was separated, washed with ether (500 mL) and cooled to 2-3oC. To the stirred mixture was added concentrated aqueous hydrochloric acid until a pH of 3 was obtained. The resulting precipitate was collected by filtration, washed with ice-cold water (20 mL), dried first in open air, and then in a vacuum desiccator over phosphorus pentoxide to afford 2-methyl-2H-pyrazole-3-carboxylic acid as a white powder. Compound wt: 35.3 g, 45.4% yield. 1H NMR (400 MHz, DMSO-d6) delta: 13.31(1H, bs); 7.50 (1H, d); 6.81 (1H, d); 4.07 (3H, s).

According to the analysis of related databases, 930-36-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dykes, Graeme James; Fletcher, Stephen Robert; Menet, Christel Jeanne Marie; Merayo, Nuria Merayo; Schmitt, Benoit Antoine; US2008/242661; (2008); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 930-36-9, name is 1-Methylpyrazole, A new synthetic method of this compound is introduced below., Safety of 1-Methylpyrazole

N-methylpyrazole (1.0 g, 1 eq.) was dissolved in N,N-dimethylformamide (2.8 ml, 3 eq.), phosphorus oxychloride (1.3ml, 1.2 eq.) was added dropwise at 90 C over about 1 h. The mixture was reacted for another 2 h and then cooled. The reaction liquid was poured into iced water and adjusted with 10% aqueous sodium hydroxide solution to PH 4?5, extracted four times with dichloromethane, rinsed with water twice, and separated by column chromatography to give 600 mg product

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Shanghai Institute Of Materia Medica Chinese Academy of Sciences; SHEN, Jianhua; WANG, Yiping; CHEN, Xinde; XU, Wenwei; WANG, Kai; (84 pag.)EP3239135; (2017); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Electric Literature of 930-36-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 930-36-9, name is 1-Methylpyrazole belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

The (1 -methyl-1 H-pyrazol-5-yl)acetic acid used in the above procedure was prepared as follows: (i) 1 -Methyl-1 H-pyrazole-5-carbaldehyde was prepared as follows (c.f. Bioorg. Med. Chem., 2001 , 9, 961-982): A solution of 1 -methyl- 1 H-pyrazole (11.0 g, 0.134 mol) in tetrahydrofuran (200 ml) was stirred at -700C under argon. n-Butyl lithium (2.5 M in hexanes, 58.8 ml, 0.147 mol) was added dropwise maintaining the internal reaction temperature below -600C. The mixture was cooled to -700C and N, N- dimethylformamide (40 ml) was added dropwise. The reaction mixture was allowed to warm to room temperature overnight. The mixture was cooled to 00C and water (200 ml) was added followed by ethyl acetate (300 ml). The organic layer was separated and the aqueous layer was re-extracted with ethyl acetate. The combined organic extracts were washed with water, brine, then dried and evaporated. The residue was purified by flash chromatography on silica gel eluting with 0-100% ethyl acetate in hexanes to afford 1 -methyl-1 H-pyrazole-5-carbaldehyde which was used in the next step.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methylpyrazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GLAXO GROUP LIMITED; WO2008/125600; (2008); A2;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Reference of 930-36-9, These common heterocyclic compound, 930-36-9, name is 1-Methylpyrazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Under room temperature, the 1-methyl -1H-pyrazole (2.0g, 24.4 mmol) dissolved in THF in (30 ml). Under the protection of the nitrogen of the obtained mixture to lower the temperature to -78 C, then slowly dripping n-BuLi to the (10.72 ml, 26.8 mmol). Then the resulting mixture at -78 C stirring 2 hours, to room temperature, then the stirring is performed for 1 hour. Then to the reaction solution to maintain this temperature in drying CO2gas, approximately through 5 minutes. After stirring at room temperature, to 1 hours. To the obtained water is added in the mixture of (30 ml) the reaction quenching and diluting. The resulting mixture is extracted with methylene chloride. After acid aqueous phase precipitating a large amount of solid, filtered. The resulting filter cake is dried to obtain 1.5 g of white solid (yield: 48.8%).

Statistics shows that 1-Methylpyrazole is playing an increasingly important role. we look forward to future research findings about 930-36-9.

Reference:
Patent; CSPC Weisheng Pharmaceutical Technology (Shijiahuang) Co., Ltd.; Shi, Ying; Gao, Qingzhi; Mi, Yi; Wang, Xuliang; (129 pag.)CN105384739; (2016); A;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Related Products of 930-36-9,Some common heterocyclic compound, 930-36-9, name is 1-Methylpyrazole, molecular formula is C4H6N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Methylpyrazole (4.1 g, 50 mmol, 1 equiv) and anhydrous DMF (11.6 ml, 3 equiv) were placed in a 100 ml of two-neck flask which was equipped with a Allihn condenser (a CaC12 drying tube was connected thereto) and a constant- pressure dropping thnnel, and the flask was placed in the oil bath of 90 C. Phosphorus oxychloride (5.6 ml, 1.2 equiv) was added dropwise over a period of 1 h. After the addition was completed, the mixture was stirred for a further 2 h. Then the solution was cooled and poured into a lot of ice water. The resulting mixture was brought to pH 4-5 with a solution of 10% NaOH solution and then extracted with dichloromethane several times until the product in the aqueous phase is little. The combined organic phase was washed with a small amount of brine twice, dried over MgSO4, filtered and then evaporated in vacuo to give the crude product of 1-me- thyl-1H-pyrazole-4-carbaldehyde, which can be directly used in the next step without further separation.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Methylpyrazole, its application will become more common.

Reference:
Patent; Shen, Jianhua; Wang, Yiping; Wang, Kai; US2014/171431; (2014); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 930-36-9, name is 1-Methylpyrazole, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C4H6N2

A solution of N-methylpyrazole (5.12 g, 62.4 mmol) in THF (100 mL) was cooled to -78 C. and 2.5 M n-butyllithium in hexane (27.5 mL, 68.8 mmol) was added. After stirring for 30 minutes at the same temperature, 0.5 M zinc chloride in THF (107 mL, 53.5 mmol) and 1 M zinc chloride in diethyl ether (15.3 mL, 15.2 mmol) were added. The mixture was allowed to warm to room temperature and 2-iodo-4-nitroanisole (17.4 g, 62.4 mmol) followed by tetrakis(triphenylphosphine)palladium (3.6 g, 3.1 mmol) were added. After stirring at 60 C. for 20 hours, the black solution was concentrated on a rotary evaporator, and extracted with ethyl acetate and brine. Combined organic layers were dried over magnesium sulfate, filtered, and partly concentrated until a solid started to precipitate. Hexane was added, precipitate was filtered off, and washed with a cold 3:1 mixture of hexane/ethyl acetate to give 5-(2-methoxy-5-nitro-phenyl)-1-methyl-1H-pyrazole (8.6 g, 36.9 mmol, 59%) as a tan solid. LCMS m/z (%/o)=234 (M+H, 100). 1H NMR (400 MHz, CDCl3) delta: 8.34 (dd, J=2.8, 9.2 Hz, 1H), 8.19 (d, J=2.8 Hz, 1H), 7.56 ( d, J=2.0 Hz, 1H), 7.08 (d, J=9.2 Hz, 1H), 6.31 (d, J=1.6 Hz, 1H), 3.96 (s, 3H), 3.74 (s, 3H).

According to the analysis of related databases, 930-36-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Teegarden, Bradley; Xiong, Yifeng; Strah-Pleynet, Sonja; Jayakumar, Honnappa; Dosa, Peter I.; Feichtinger, Konrad; Casper, Martin; Lehmann, Juerg; Jones, Robert M.; Unett, David J.; Karoline Choi, Jin Sun; US2007/207994; (2007); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 930-36-9, name is 1-Methylpyrazole, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 930-36-9, Computed Properties of C4H6N2

Two identical reactions were carried out in parallel.To a mixture of 1 -methylpyrazole (750 g, 9.16 mol) and acetic anhydride (1.7 kg, 16.67 mol) was added concentrated H2S04 (75 g, 0.75 mol) at about 20 C. The reaction mixture was heated at about 150 C. for about 3 hrs. After cooling, the two mixtures were combined, poured into ice-water (15 L), adjusted to about pH 10 with 20% aq. NaOH and extracted with DCM (4×10 L). The combined DCM extracts were dried (Na2SO4) and concentrated to afford the title compound as a brown oil (1240 g, 72%).?H NMR (400 MHz, CDCl3) delta: 7.86 (s, 1H), 7.84 (s, 1H), 3.92 (s, 3H), 2.40 (s, 3H).GCMS mlz=109.0 [M-CH3]+

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Pfizer Inc.; BROWN, Matthew Frank; DERMENCI, Alpay; FENSOME, Andrew; GERSTENBERGER, Brian Stephen; HAYWARD, Matthew Merrill; OWEN, Dafydd Rhys; WRIGHT, Stephen Wayne; XING, Li Huang; YANG, Xiaojing; (67 pag.)US2017/240552; (2017); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics