Category: pyrazoles-derivatives

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 852227-86-2, name is 5-(Chloromethyl)-1,3-dimethyl-1H-pyrazole, A new synthetic method of this compound is introduced below., Formula: C6H9ClN2

A solution of 7d (58 mg, 0.20 mmol, 1.0 equiv) in anhydrous DMF (0.8 mL) was treated with 60% sodium hydride (18 mg, 0.44 mmol, 2.2 equiv). After stirring at room temperature for 5 min, 5-(chloromethyl)-l,3-dimethyl-lH-pyrazole (63 mg, 0.42 mmol, 2.1 equiv) was introduced. Then the mixture was stirred at room temperature for 2 hours. The reaction was quenched with saturated aqueous NaHCO3. The resulting solution was extracted with ethyl acetate. The combined extracts were washed once with brine, dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by prep-TLC (ethyl acetate/dichloromethane/ methanol 10/10/1, 2 runs) to afford compound 30 (50 mg, 50%) as a white solid. MS 505 (MH)+, 503 (M-H)”. Purity 99% (HPLC).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SEQUOIA PHARMACEUTICALS, INC.; WO2009/105776; (2009); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 25711-30-2, name is 1,5-Dimethyl-1H-pyrazole-4-carbaldehyde, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 25711-30-2, Quality Control of 1,5-Dimethyl-1H-pyrazole-4-carbaldehyde

Example 17 N4-[(trans-4-{[(1,5-dimethyl-1H-pyrazol-4-yl)methyl]amino}cyclohexyl)methyl]-5-nitro-N2-[2-(trifluoromethoxy)benzyl]pyrimidine-2,4-diamine A mixture of N4-[(trans-4-aminocyclohexyl)methyl]-5-nitro-N2-[2-(trifluoromethoxy)benzyl]-pyrimidine-2,4-diamine (100 mg, 0.23 mmol) and 1,5-dimethyl-1H-pyrazole-4-carbaldehyde (23 mg, 0.19 mmol) in CH2Cl2 (15 mL) was stirred at room temperature for 1 h. NaBH(OAc)3 (200 mg, 0.95 mmol) was then added to the reaction mixture and stirred for another 16 h. The reaction mixture was diluted with 1M Na2CO3 to pH 9-10 and the organic phase was separated. The aqueous phase was extracted with CH2Cl2. The combined organic phase was dried over Na2SO4 and concentrated. The resulting residue was purified by silica gel prep TLC using 98:2 CH2Cl2:MeOH as an eluent to afford 54 mg (52%) of the title compound as a pale yellow foam, m/z 549.7 [M+1]+

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,5-Dimethyl-1H-pyrazole-4-carbaldehyde, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Boehringer Ingelheim Pharmaceuticals, Inc.; US2006/25433; (2006); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 139756-02-8, name is 4-Amino-1-methyl-3-N-propyl-1H-pyrazole-5-carboxamide, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 4-Amino-1-methyl-3-N-propyl-1H-pyrazole-5-carboxamide

Preparation of 4-[2-Propoxy Benzamido]-1-Methyl-3-Propyl-5-Carbamoyl Pyrazole To a solution of 25 g of 2-propoxy benzoic acid dissolved in dichloromethane, 66 g of thionyl chloride was added and stirred for 3 hours under reflux. After reaction was completed, the solvent and excessive thionyl chloride were distilled off under reduced pressure. To the residue was added 200 ml of dichloromethane (reaction solution 1). In another container, to 24 g of 1-methyl-3-propyl-4-amino-5-carbamoyl pyrazole in dichloromethane was added 13.4 g of triethylamine and 100 mg of dimethylaminopyridine and then cooled to 0 C., to which said reaction solution 1 was slowly added while maintaining the temperature of the solution at 0 C., and then stirred for 1 hour. The reaction mixture was successively washed with water, saturated aqueous sodium bicarbonate solution and brine. The organic layer was dried over anhydrous sodium sulfate and then filtered. The filtrate was concentrated under reduced pressure to obtain a crude product and then triturated with hexane to give 39 g of the title compound. 1H NMR (CDCl3): 0.91(t,3H), 1.05(t,3H), 1.62(m,2H), 1.89(m,2H), 2.52(t,2H), 4.06(s,3H), 4.18(t,2H), 5.57(br s,1H), 7.09(m,2H), 7.52(m,1H), 7.73(br s,1H), 8.26(dd,1H), 9.45(br s,1H)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 139756-02-8.

Reference:
Patent; Yoo, Moo-Hi; Kim, Won-Bae; Chang, Min-Sun; Kim, Soon-Hoe; Kim, Dong-Sung; Bae, Chul-Jun; Kim, Yong-Duck; Kim, Eun-Ha; US2003/176696; (2003); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

179692-08-1, name is Ethyl 4-iodo-1H-pyrazole-5-carboxylate, belongs to pyrazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Quality Control of Ethyl 4-iodo-1H-pyrazole-5-carboxylate

Example 15, Step C [00154] To a solution of compound 15c (38 g, 143 mmol) in acetonitrile (380 mL) at r.t. was added K2C03 (39.5 g, 286 mmol) and then PMBCI (24 mL, 177 mmol). The reaction mixture was stirred at 60C overnight. After cooling to r.t., the mixture was filtered and concentrated under reduced pressure. The residue was purified by chromatography on silica gel to afford compound 15d (32 g, 58%).[00155] This compound was characterized by proton NMR (1HNMR) and mass spectroscopy (MS) in accordance with the procedures described herein. Proton NMR yielded the following results: 1H NMR (DMSO-d6, 400MHz): delta 8.13(s, 1 H), 7.23(d, J = 8.8 Hz, 2H), 6.90(d, J = 8.8 Hz, 2H), 5.29(s, 2H), 4.24 (q, J = 6.8 Hz, 2H), 3.71 (s, 3H); 1.26(t, J = 6.8 Hz, 3H). Mass spectroscopy indicated MS (ESI): m/z 387 (M+H)+.

The synthetic route of 179692-08-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; ADDEX PHARMA SA; LIVERTON, Nigel, J.; BOLEA, Christelle; CELANIRE, Sylvain; LUO, Yunfu; WO2012/6760; (2012); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Reference of 114474-28-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 114474-28-1 name is 4-(1H-Pyrazol-4-yl)aniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

[0255] A mixture of 2,4-dichloropyrido[3,4-d]pyrimidine (250 mg, 1.25 mmol), 4-(lH- pyrazol-4-yl)aniline (199, 1.25 mmol), and iPr2NEt (0.44 mL, 2.50 mmol) in DMF (2.5 mL) was heated at 100 C for 5h, cooled to rt, and diluted with water. The precipitate formed was collected by filtration and washed with water and dried in vacuo to provide the title compound (400 mg, 99%). MS (ES+) m/e 323 (M+H) +.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-(1H-Pyrazol-4-yl)aniline, and friends who are interested can also refer to it.

Reference:
Patent; KADMON CORPORATION, LLC; OLSZEWSKI, Kellen; KIM, Ji-In; POYUROVSKY, Masha; LIU, Kevin; BARSOTTI, Anthony; MORRIS, Koi; (344 pag.)WO2016/210330; (2016); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Electric Literature of 1280210-79-8,Some common heterocyclic compound, 1280210-79-8, name is tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, molecular formula is C10H15N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4,6-Dihydro-2H-pyrrolo[3,4-c]pyrazole-5-carboxylic acid tert-butyl ester (0.50 g, 2.39 mmol) was dissolved in tetrahydrofuran (15 mL).Nitrogen protection,Sodium hydride (0.19 g, 4.77 mmol, 60%) was added at 0 C, and the mixture was slowly warmed to room temperature for 1 hour.Cool down to 0 C,Thiophene-2-sulfonyl chloride (0.65 g, 3.58 mmol) was added and allowed to react at room temperature for 15 hours.The reaction was quenched with water (10 mL) EtOAc.The combined organic phases were washed with a saturated sodium chloride solution (10 mL).Dry over anhydrous sodium sulfate and concentrate by suction filtration.The residue was subjected to silica gel column chromatography[ethyl acetate/petroleum ether (v/v) = 1/4] purified,The title compound was obtained (0.71 g, 84%).It is a white solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route tert-Butyl 4,6-dihydropyrrolo[3,4-c]pyrazole-5(2H)-carboxylate, its application will become more common.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Ruyuan Yong Xing Technology Services Co., Ltd.; Li Jianhao; Gu Zheng; Deng Xinshan; Tang Wanjun; Zhang Zongyuan; Kang Panpan; Yuan Weihui; Peng Fei; (49 pag.)CN109942583; (2019); A;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Reference of 37622-90-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 37622-90-5 name is Ethyl 4-pyrazolecarboxylate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Intermediate 8 -(4-Chloromethyl-benzyl)-1 H-pyrazole-4-carboxylic acid ethyl ester 1 H-Pyrazole-4-carboxylic acid ethyl ester (2 g, 13.9 mmol), (4-chloromethyl-phenyl)- methanol (2.21 g, 13.9 mmol) and triphenylphosphine (4.49 g, 16.8 mmol) are dissolved in tetrahydrofuran (40 ml). The solution is cooled to 0C then diethylazodicarboxylate(6.47 ml, 16.6 mmol) is added. The mixture is stirred at 0C for 2 hours, then 1 hour at room temperature. The solvent is removed under vacuum and the residue is purified by flash chromatography (0 – 50% ethyl acetate in cyclohexane) to give the title compound (Yield 1 .72 g). LC (Method 2): tR = 4.40 min; Mass spectrum (ES+): m/z = 279 [M+H ]+

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Ethyl 4-pyrazolecarboxylate, and friends who are interested can also refer to it.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; FRATTINI, Sara; BAKKER, Remko; GIOVANNINI, Riccardo; HAMPRECHT, Dieter; LINGARD, Iain; PAUTSCH, Alexander; WELLENZOHN, Bernd; (92 pag.)WO2017/72020; (2017); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Electric Literature of 4149-06-8,Some common heterocyclic compound, 4149-06-8, name is 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, molecular formula is C9H9N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: The mixture of alpha,beta-unsaturated ketone 1, or 4 (1.0 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one 2 (1.0 mmol), p-TSAxH2O (0.3mmol), MeCN (4mL), H2O (4mL) was put in a reaction flask under 80 C about 1-3 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be precipitated out at same time. Then, it was filtered, washed thoroughly with MeCN. The products were recrystallized from DMF.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3-Amino-1-phenyl-1H-pyrazol-5(4H)-one, its application will become more common.

Reference:
Article; Xu, Shuangshuang; Wang, Zhansheng; Li, Xiuling; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 72; 38; (2016); p. 5754 – 5761;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

Application of 876343-24-7, The chemical industry reduces the impact on the environment during synthesis 876343-24-7, name is 1-Ethyl-1H-pyrazol-4-amine, I believe this compound will play a more active role in future production and life.

Example 1; iV-(l-ethyl-lJ-pyrazol-4-yl)-2-[2-methoxy-4-(l,6-naphthyridin-4-yloxy)phenyl]acetamide; Diisopropylethylamine (0.417 ml) and 2-(7-azabenzotriazol-l-yl)- 1,1,3,3-tetramethyluronium hexafluorophosphate(V) (0.395 g) were added in turn to a stirred mixture of 2-[2-methoxy-4-(l,6-naphthyridin-4-yloxy)phenyl]acetic acid (0.27 g),4-amino-l -ethyl- 1/i-pyrazole (0.179 g) and DMF (3 ml) and the resultant mixture was stirred at ambient temperature for 18 hours. The resultant mixture was evaporated and the residue was purified by reversed-phase preparative HPLC on a Waters ‘Xbridge’ Cl 8 column (5 microns silica, 19 mm diameter, 100 mm length) using a solvent gradient comprising 13:17 to 100:0 mixtures of acetonitrile and 0.02M aqueous ammonium carbonate as eluent for 4.5 minutes at a flow rate of 40 ml per minute. The material so obtained was further purified by column chromatography on silica using a solvent gradient from methylene chloride to a 9:1 mixture of methylene chloride and 7M methanolic ammonia solution as eluent. There was thus obtained the title compound as a solid (0.12 g); 1H NMR Spectrum: (DMSOd6) 1.33 (t, 3H), 3.61 (s, 2H), 3.77 (s, 3H), 4.07 (q, 2H), 6.75 (d, IH), 6.91 (m, IH), 7.06 (d, IH), 7.37 (d, IH), 7.42 (s, IH), 7.88 (s, IH), 7.92 (d, IH), 8.82 (d, IH), 8.9 (d, IH), 9.71 (s, IH), 10.05 (s, IH); Mass Spectrum: M+H+404.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Ethyl-1H-pyrazol-4-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2007/113565; (2007); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2075-45-8 as follows. Formula: C3H3BrN2

Step 1 : 4-(Methylthio)-1H-pyrazole A suspension of 4-bromopyrazole (4 g, 27 mmol) in tetrahydrofuran (68 mL) was cooled to 0C and n-butyllithium (2.5 M in hexanes, 35.9 mL, 90 mmol) was added dropwise over a period of 20 min. The reaction mixture was stirred at room temperature for 1 h and then was cooled to 0C. 1 ,2-Dimethyldisulfide (2.66 mL, 30.0 mmol) was added dropwise. The reaction mixture was stirred at 0C for 1.5 h. The reaction mixture was poured into water (150 mL) and then it was acidified to pH~8 with a saturated aqueous solution of ammonium chloride and a solution of aqueous hydrochloric acid (1 N). The mixture was extracted with ethyl acetate (150 mL x 3) and the combined organic layers were dried over sodium sulfate, filtered and concentrated under reduced pressure to afford 4-(methylthio)-1 H-pyrazole (3300 mg). 1H NMR (500 MHz, CDCI3) delta 2.36 (s, 3H), 7.63 (s, 2H).

According to the analysis of related databases, 2075-45-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; PFIZER INC.; AHN, Kay; BOEHM, Markus; CABRAL, Shawn; CARPINO, Philip A.; FUTATSUGI, Kentaro; HEPWORTH, David; KUNG, Daniel W.; ORR, Suvi; WANG, Jian; WO2013/150416; (2013); A1;,
Pyrazole – Wikipedia,
Pyrazoles – an overview | ScienceDirect Topics