Category: pyrazoles-derivatives

Electric Literature of 105434-90-0, These common heterocyclic compound, 105434-90-0, name is Ethyl 5-amino-1H-pyrazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 5-Amino~lH-pyrazole-3~carboxylic acid ethyl ester (0.0775 g, 0.500 mmol), benzaldehyde (0.064 g, 0.60 mmol) and sodium triacetoxyborohydride (0.212 g, 1.00 mmol) in dichloroethane (5 cm3) and stirred over night at 6O0C. The solution was diluted with further dichloroethane (10 cm3), was washed with NaHCO3, until there was no further gas evolution, then with brine. The organic phase was dried over anhydrous Na2SO4, filtered, and solvent removed under reduced pressure to give a brown oil. The crude product was taken into acetonitrile (3 cm3) and purified by preparatory HPLC to give 5-benzylamino-lH-pyrazole-3- carboxylic acid ethyl ester.5-Benzylamino-lH-pyrazole-3-carboxylic acid ethyl ester was taken up in IM lithium hydroxide: tetrahydrofuran : methanol (1 : 5 : 1) (10 cm3)and heated at reflux over night. Solvent EPO was removed under reduced pressure and the crude product was acidified to pH 1 with 0.1M HCl and extracted with ethyl acetate (10 cm3). The organic phase was dried over anhydrous Na2SO4, filtered, and solvent removed under reduced pressure to give a brown, glassy solid. 1H (DMSO- d6): 7.35-7.2 (m, 5H, CH2C6H5), 6.0 (s, IH), 4.5 (s, 2H, CH2C6H5). m/z (ES+): 218 [M+H]+

Statistics shows that Ethyl 5-amino-1H-pyrazole-3-carboxylate is playing an increasingly important role. we look forward to future research findings about 105434-90-0.

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 3524-32-1 as follows. name: 5-Amino-1,3-dimethylpyrazole

A mixture of 5-amino-1,3-dimethyl-pyrazol (1.87 g, 16.8 mmol), 2,4-dichlorobenzaldehyde (2.95 g, 16.8 mmol, Fluorochem), and 2-mercapto-2-methylpropanoic acid (2.5 g, 20.8 mmol) was heated, in a microwave for about 60 min, at about 100 C. Subsequently, the reaction mixture was sealed and heated, for about 24 h, at about 150 C. After cooling to rt, THF (300 ml) was added, followed by EDC.HCl (4.25 g, 22 mmol) and DMAP (4-dimethylamino-pyridine, 0.2 g, 1.64 mmol). Subsequently, the reaction mixture was stirred for about 24 h, at rt. NaOH (2 M aqueous, 10 mL) and ethyl acetate (200 mL) were added. The layers were separated and the aqueous layer was extracted with ethyl acetate (50 mL). The combined organic layers were washed with water (2×50 mL), dried (MgSO4), filtered and concentrated in vacuo. The residue was purified by column chromatography (SiO2, diethyl ether, followed by ethyl acetate) to afford 4-(2,4-dichlorophenyl)-1,3,6,6-tetramethyl-4,8-dihydropyrazolo[3,4-e][1,4]thiazepin-7-one (3.11 g, 8.4 mmol, 50%) as white solid: 1H-NMR (CDCl3, Bruker 400 MHz) delta 1.51 (3H, s); 1.64 (3H, s); 1.67 (3H, s); 3.78 (3H, s); 5.77 (1H, s); 7.17 (1H, dd, J=8.4, 2.0 Hz); 7.28 (1H, d, J=8.4 Hz); 7.41 (1H, d, J=2.0 Hz); H, m); 8.43 (1H, bs).

According to the analysis of related databases, 3524-32-1, the application of this compound in the production field has become more and more popular.

Adding a certain compound to certain chemical reactions, such as: 34091-51-5, name is 5-Iodo-1-methyl-1H-pyrazole, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 34091-51-5, SDS of cas: 34091-51-5

Example 41 N-[(2-Chloro-3,4-difluorophenyl)methyl]-3-methyl-1 -(1 -methyl-1 H- pyrazol-5-yl)-2-oxo-4-imidazolidinecarboxamide (E41) (in a form obtainable or prepared from (4S)-2-oxo-3-{[(phenylmethyl)oxy]carbonyl}-4-imidazolidinecarboxylic acid); To a stirred mixture of N-[(2-chloro-3,4-difluorophenyl)methyl]-3-methyl-2-oxo-4- imidazolidinecarboxamide (60.7 mg, 0.2 mmol) (prepared as described in Example 28), 5-iodo-1-methyl-1 H-pyrazole (41.6 mg, 0.2 mmol) in 1 ,4-dioxane (4 ml) was added potassium phosphate (212 mg, 1 mmol), copper (I) iodide (38.1 mg, 0.2 mmol) and trans-N,N-dimethylcyclohexane-1 ,2-diamine (0.032 ml, 0.2 mmol) and the mixture was heated at reflux under argon for 1 h. The mixture was cooled to room temperature and partitioned between saturated sodium hydrogen carbonate solution and dichloromethane. The organic extracts were separated, washed with water and brine, dried and evaporated. The residue was purified by mass-directed automated HPLC to give N-[(2-chloro-3,4-difluorophenyl)methyl]-3-methyl-1-(1-methyl-1 H- pyrazol-5-yl)-2-oxo-4-imidazolidinecarboxamide (18 mg, 23%). LC/MS [M+H]+ = 384, retention time = 2.22 minutes.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Iodo-1-methyl-1H-pyrazole, and friends who are interested can also refer to it.

Adding a certain compound to certain chemical reactions, such as: 23170-45-8, name is Methyl 3-methyl-1H-pyrazole-4-carboxylate, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 23170-45-8, Recommanded Product: 23170-45-8

Methyl 3-methyl-1-(1-phenylethyl)-1H-pyrazole-4-carboxylate. To a solution of methyl 3-methyl-1H-pyrazole-4-carboxylate (280 mg, 2 mmol) in DMF (30 mL) was added (1-bromoethyl)benzene (0.37 g, 2 mmol) and potassium carbonate (0.55 g, 4 mmol). The mixture was stirred at 20 C and stirred for 12 h. The solvent was evaporated in vacuo and the residue was purified by HPLC (Column: Dsisol, 10mu, C18, 250 mm x 50 mm; Mobile: acetonitrile (0.1% formic acid)-water (0.1% formic acid), acetonitrile from 30 to 70 in 80 minutes; oven: 20 C; flow rate: 50 mL/minute, wavelength: 214 nm) to give methyl 3-methyl-1-(1-phenylethyl)-1H-pyrazole-4-carboxylate (90 mg, 19%, desired) and methyl 5-methyl-1-(1-phenylethyl)-1H-pyrazole-4-carboxylate (80 mg, 16%). The product was used for the next step directly.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 3-methyl-1H-pyrazole-4-carboxylate, other downstream synthetic routes, hurry up and to see.

Application of 25016-11-9, The chemical industry reduces the impact on the environment during synthesis 25016-11-9, name is 1-Methyl-1H-pyrazole-4-carbaldehyde, I believe this compound will play a more active role in future production and life.

General procedure: To the solution of 45.0 g aldehyde 10 (0.363 mol) in 225 cm3 pyridine, 45.4 g malonic acid (0.436 mol) and 0.900 g piperidine (10.9 mmol) were added. The resulting mixture was heated at 70 C for 3 days. The solvent was removed in vacuo, and the residue was triturated with H2O. The precipitate was filtered to give the product 11

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methyl-1H-pyrazole-4-carbaldehyde, other downstream synthetic routes, hurry up and to see.

Adding a certain compound to certain chemical reactions, such as: 152120-54-2, name is tert-Butyl (((tert-butoxycarbonyl)amino)(1H-pyrazol-1-yl)methylene)carbamate, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 152120-54-2, Computed Properties of C14H22N4O4

Preparation of (R)-6-[2,3-bis(tert-butoxycarbonyl)guanidino]-2-[(tert-butoxycarbonyl)amino]hexanoic acid (8) A solution of N-alpha-Boc-D-lysine 12 (10.0 g, 40.6 mmol) in CH2Cl2 (200 mL) was charged with N,N’-bis-Boc-1-guanylpyrazole (11.3 g, 36.6 mmol) and triethylamine (11.0 mL, 81.3 mmol). The reaction mixture was stirred at room temperature for 16 h. The reaction mixture was washed with 10% aqueous citric acid (2*100 mL) and the solvent was removed under reduced pressure. The residue was dissolved in 1 N NaOH (300 mL), 1 N HCl was added to adjust the pH to 5-6, and the mixture was extracted with CH2Cl2 (500 ml). The CH2Cl2 layer was separated and the aqueous layer was extracted with CH2Cl2 (2*250 mL). The combined organic layers were dried over Na2SO4, filtered, and concentrated to afford compound 8 (18.5 g, 94%) as a white solid: 1H NMR (400 MHz, CD3OD) delta 4.13-4.03 (m, 1H), 3.36 (t, J=6.8 Hz, 2H), 1.91-1.77 (m, 1H), 1.74-1.55 (m, 3H), 1.52 (s, 9H), 1.51-1.38 (m, 2H), 1.47 (s, 9H), 1.43 (s, 9H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl (((tert-butoxycarbonyl)amino)(1H-pyrazol-1-yl)methylene)carbamate, other downstream synthetic routes, hurry up and to see.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 29097-00-5, name is Methyl 3-amino-1H-pyrazole-4-carboxylate, A new synthetic method of this compound is introduced below., COA of Formula: C5H7N3O2

General procedure: A mixture of aminoazole 1c-e (1 mmol), acetoacetamide 2a,b,d (1 mmol), and aromatic aldehyde 3b,d-g (1 mmol) in 0.1 mL of DMF was heated to reflux for 10 min. After cooling acetone (10 mL) was added. The precipitate formed was filtered out to give the solid dihydropyrimidines 7a-e, which were washed with acetone and air dried.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Some common heterocyclic compound, 1904-31-0, name is 1-Methyl-1H-pyrazol-3-amine, molecular formula is C4H7N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 1904-31-0

A solution of 1-methyl-1H-pyrazol-3-ylamine (0.92 g, 9.5 mmol) in benzene (4.8 mL) was treated with hexane-2,5-dione (1.34 mL, 11.4 mmol) and para-toluenesulfonic acid (182 mg, 0.95 mmol) and was heated to 115 C. under Dean-Stark conditions for 4 h. After this time, the reaction was cooled to 25 C., concentrated in vacuo and dried under high vacuum overnight. The resulting residue was dissolved in methylene chloride (100 mL) and was washed with water (1¡Á150 mL), dried over sodium sulfate, filtered and concentrated in vacuo. Silica gel column chromatography (ISCO, 80 g, 1:4 ethyl acetate/hexanes) afforded 3-(2,5-dimethyl-pyrrol-1-yl)-1-methyl-1H-pyrazole (1.57 g, 94%) as a green oil; ES+-HRMS m/e calcd for C10H13N3 [M+H+] 176.1182, found 176.1182.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1904-31-0, its application will become more common.

Electric Literature of 6647-97-8, These common heterocyclic compound, 6647-97-8, name is 4-Iodo-1,3-dimethyl-1H-pyrazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To iodopyrazole (1 mmol) dissolved in THF (10 mL), Fuajasite (250 mg) was added. Nitric acid (d 1.52 g/cm3, 10 mL) was added slowly and the mixture was stirred at room temperature for required time. The catalyst was recovered by filtration and the filtrate was extracted repeatedly with dichloromethane. The solvent was removed under vacuum to obtain nitropyrazole.

The synthetic route of 6647-97-8 has been constantly updated, and we look forward to future research findings.

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 120068-79-3 as follows. SDS of cas: 120068-79-3

Comparative Example 13; [0123] Direct sulfinylation of N-phenyl pyrazole starting material (III) according to known methods was tested. As such, sulfinylation was attempted using CF3SO2Na in the presence of a halogenating agent such as POCl3, SOCl2 or PBr3. (III) (II)The reaction reagents and conditions tested are provided in Table I below. Table IUl The results are provided in Table II below: Table II[0124] The reaction proceeded to the desired product, Fipronil, when SOCl2 or POCl3 were used as halogenating agents. However, PBr3 did not yield the desired product, or at least not in acceptable yield (about 6%~8% (II) in the reaction mixture, according to HPLC).

According to the analysis of related databases, 120068-79-3, the application of this compound in the production field has become more and more popular.