Sources of common compounds: 132712-71-1

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 132712-71-1, name is 3-Methyl-1H-pyrazol-5-ol, A new synthetic method of this compound is introduced below., COA of Formula: C4H6N2O

General procedure: 5-Amino-4-arylazo-3-methyl-1-phenylpyrazoles (0.01 mol) weredissolved in a mixture of glacial acetic acid and concentrated hydrochloricacid (20 ml, ratio 1:1) and the solutionwas then cooled to 0-5 C. Sodiumnitrite (0.69 g, 0.01 mol) in water (10 ml) was then added to this solution dropwise with vigorous stirring, for about 1 h, while cooling at0-5 C. Then the resulting diazonium solution was added in portionsover 30 min to a vigorously stirred solution of 5-hydroxy-3-methyl-1H-pyrazole or 5-hydroxy-3-methyl-1-phenylpyrazole (0.01 mol) in KOH (0.56 g, 0.01mol) andwater (10ml) between 0 and 5 C,maintainingthe pHat 7-8 by simultaneous sodiumacetate solution addition. The mixture was then stirred for 2 h at 0-5 C. The precipitated product separated upon dilution with water (50 ml) was filtered off, washed with water several times, dried and crystallized from DMF-H2O

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Extended knowledge of 852227-86-2

Statistics shows that 5-(Chloromethyl)-1,3-dimethyl-1H-pyrazole is playing an increasingly important role. we look forward to future research findings about 852227-86-2.

Related Products of 852227-86-2, These common heterocyclic compound, 852227-86-2, name is 5-(Chloromethyl)-1,3-dimethyl-1H-pyrazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a stirred suspension of10(30 mg, 0.07 mmol) and potassium carbonate (20 mg, 0.15 mmol) in DMF (500 muL) was added 2-bromoacetamide (15 mg, 0.11 mmol) and the mixture heated to 80 C for 1 h. The reaction mixture was concentrated to dryness and 4 MHCl/dioxane (1 mL) added. After concentrating to dryness, the residue was purified by prepHPLC(high pH) to afford the title compound(8 mg, 30%) as a white powder.

Statistics shows that 5-(Chloromethyl)-1,3-dimethyl-1H-pyrazole is playing an increasingly important role. we look forward to future research findings about 852227-86-2.

Simple exploration of 25711-30-2

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 25711-30-2, name is 1,5-Dimethyl-1H-pyrazole-4-carbaldehyde, A new synthetic method of this compound is introduced below., COA of Formula: C6H8N2O

Example 15 4-((1,5-Dimethyl-1H-pyrazol-4-yl)methylene)-2-(2-thienyl)-5(4H)-oxazolone To a screw-capped test tube, N-(2-thienylcarbonyl)glycine (56 mg, 0.3 mmol), 1,5-dimethyl-1H-pyrazol-4-carboxaldehyde (41 mg, 0.3 mmol), sodium acetate (25 mg, 0.3 mmol) and acetic anhydride (0.3 mL) were added. The test tube was sealed, and it was then stirred at an external temperature of 90 C. Three hours later, the temperature of the reaction solution was returned to room temperature, and water (1.5 mL) was then added thereto. The obtained mixture was stirred at the same temperature as described above for 1.5 hours. Thereafter, the precipitated crystal was collected by filtration, and it was washed with water (5 mL) and was then dried under reduced pressure, so as to obtain 35 mg of the above-captioned compound. 1H-NMR (400 MHz, DMSO-d6, delta). 8.34 (s, 1H), 8.04 (d, J=4.9 Hz, 1H), 7.90 (d, J=3.7 Hz, 1H), 7.32 (dd, J=3.8, 4.9 Hz, 1H), 7.19 (s, 1H), 3.81 (s, 3H), 2.45 (s, 3H). ESI-MS m/z 274 (M+H)+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Application of 3994-50-1

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methyl-4-nitro-1H-pyrazole, other downstream synthetic routes, hurry up and to see.

Adding a certain compound to certain chemical reactions, such as: 3994-50-1, name is 1-Methyl-4-nitro-1H-pyrazole, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3994-50-1, Recommanded Product: 1-Methyl-4-nitro-1H-pyrazole

To a N2 flushed pressure vial was added (S)-tert-butyl (1-(4-chloropyridin-2-yl)but-3-en-1-yl)carbamate, prepared as described in Intermediate 23, (3.0 g, 10.61mmol), 1 -methyl-4-nitro- 1H-pyrazole (1 .348 g, 10.61 mmol), di(adamant- 1 -yl)(butyl) phosphine (1.141 g, 3.18 mmol), PvOH (0.369 ml, 3.18 mmol), K2C03 (4.40 g, 31.8 mmol) and DMF (21 mL). The reaction mixture was purged with N2 for 5 mm and Pd(OAc)2 (0.476 g, 2.122 mmol) was added. The reaction mixture was purged with N2.The vial was sealed and heated at 120 C for 4 h. The reaction mixture was cooled to rt and partitioned between 10% aqueous LiC1 (15 mL) and EtOAc (30 mL). The aqueous layer was extracted with EtOAc (2 x 20 mL) and the combined organic layers were washed with brine (15 mL), dried over MgSO4, filtered and concentrated. The crude product was then purified using normal phase chromatography to yield (S)-tert-butyl (1-(4-( 1 -methyl-4-nitro- 1H-pyrazol-5 -yl)pyridin-2-yl)but-3 -en-i -yl)carbamate (1.2 g, 29% yield) as a brown oil. MS(ESI) m/z: 374.4 (M+H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methyl-4-nitro-1H-pyrazole, other downstream synthetic routes, hurry up and to see.

Extended knowledge of 1904-31-0

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1904-31-0, name is 1-Methyl-1H-pyrazol-3-amine, A new synthetic method of this compound is introduced below., Computed Properties of C4H7N3

2-Chloro-4-(4-fluorophenyl)pyridine (1 ) (1 .0g, 4.8mmol), 1 -methyl-1 H-pyrazol-3- amine (2) (470mg, 4.8mmol), Xantphos (0.28g, 0.48mmol), and Cs2C03 (2.35g, 7.24mmol) were combined in dry 1 ,4-dioxane (15ml_). The reaction mixture was degassed with N2(g) and placed under vacuum for 10min. Pd2(dba)3 (0.22g, 0.24mmol) was then added and the resulting reaction mixture was heated at 90¡ãC for 30h. It was then poured onto demineralized water (200ml_), and extracted with EtOAc (3 x 100ml_). The organic phases were combined, dried over Na2S04, filtered and subsequently concentrated in vacuo. The resulting residue was purified by flash chromatography with EtOAc/Hexane (1 : 1 ) to provide 4-(4-fluorophenyl)-N-(1 -methyl-1 H-pyrazol-3-yl)pyridin-2-amine (3) as a yellow solid (1 .0g, 71 percent). LCMS (ES): Found 269.1 [M+H]+

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Application of 10250-64-3

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 10250-64-3, name is 1-Methyl-3-phenyl-1H-pyrazole-5-carboxylic acid, belongs to pyrazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 10250-64-3, Recommanded Product: 10250-64-3

General procedure: To a solution of 19 (1.2 eq) and HOBt(1.4 eq) in DMF (0.5 M) were added EDCI (1.3 eq) and a solution of 15a-j or 16a-j (1.0 eq) in DMF (0.25 M), Et3N (3.5 eq) at 0 C. The reaction mixture was stirred at room temperature for 24 hours, then diluted in AcOEt. The organic phase was washed with water twice, saturated aqueous NaHCO3 three times, and brine, then dried over Na2SO4,filtered, and concentrated. The residue was purified by flash column chromatography to give intermediates 17a-j and 18a-j.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Discovery of 304903-10-4

The synthetic route of 304903-10-4 has been constantly updated, and we look forward to future research findings.

Reference of 304903-10-4, These common heterocyclic compound, 304903-10-4, name is 1-Ethyl-1H-pyrazole-4-carbaldehyde, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 24: {3′-[4-(l-Ethyl-lH-pyrazol-4-ylmethyl)-piperazin-l-yl]-3,4,5,6-tetrahydro- 2H-[1, 2′]bipyridinyl-4-yl} -methanol hydrochlorideHCl To a solution of (3′-piperazin-l-yl-3,4,5,6-tetrahydro-2H-[l,2′]bipyridinyl-4- yl)-methanol (0.145 g, 0.524 mmol, 1 eq) and 1 -ethyl- lH-pyrazole-4-carbaldehyde (97.69 mg, 0.787 mmol, 1.5 eq) in 1 ,2-dichloroethane (10 mL) add sodium triacetoxyborohydride (166.79 mg, 0.787 mmol, 1.5 eq) in one portion as a solid. Stir the mixture at room temperature under nitrogen for 20 hr. Add 2 M aqueous sodium hydroxide solution (20 ml) and DCM (20 ml). Separate using a phase separator and extract the aqueous layer with DCM (10 ml). Concentrate the combined organic extracts and purify by high pH reverse phase HPLC. Dissolve this material (120 mg, 0.31 mmol) in the minimum quantity of 50% aqueous acetonitrile. Add 2 M aqueous hydrogen chloride (155 muL, 0.31 mmol) and lyophilize to give the title compound (127 mg, 58%). MS (m/z): 385.2 (M+l).

The synthetic route of 304903-10-4 has been constantly updated, and we look forward to future research findings.

Application of 16078-71-0

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 5-amino-1-phenyl-1H-pyrazole-4-carboxylate, other downstream synthetic routes, hurry up and to see.

Synthetic Route of 16078-71-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16078-71-0, name is Ethyl 5-amino-1-phenyl-1H-pyrazole-4-carboxylate belongs to pyrazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Preparation of compound 1-2 [80] The compound 1-1 (30 g, 0.12 mol) was dissolved in hydrazine hydrate (70 mL) and the mixture was stirred for 2hours at 100C. Upon completion of the reaction, the temperature was slowly raised to room temperature and then a solid was produced. Washing the solid with diethyl ether and filtering under reduced pressure gave a compound 1-2(26g,92%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 5-amino-1-phenyl-1H-pyrazole-4-carboxylate, other downstream synthetic routes, hurry up and to see.

The important role of 176969-34-9

The synthetic route of 176969-34-9 has been constantly updated, and we look forward to future research findings.

Related Products of 176969-34-9,Some common heterocyclic compound, 176969-34-9, name is 3-(Difluoromethyl)-1-methyl-1H-pyrazole-4-carboxylic acid, molecular formula is C6H6F2N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 3-(difiuoromethyl)-l-methyl-lH-pyrazole-4-carboxylic acid (0.25 g, 1.42 mmol) and thionyl chloride (5 mL) was heated to reflux for 1 h. The cooled reaction mixture was concentrated under reduced pressure and the resulting residue was twice diluted with toluene and concentrated under reduced pressure. The residual 3 -(difiuoromethyl)- 1-methyl- lH-pyrazole-4-carbonyl chloride was taken up in dichloromethane (5 mL) and treated dropwise at room temperature with a mixture of 6-chloro-N-cyclopropyl-a-methyl-3- pyridinemethanamine (i.e. the product of Step A, 0.23 g, 1.18 mmol) and triethylamine (0.12 g, 1.18 mmol) in dichloromethane. The reaction mixture was stirred overnight at ambient temperature, and then partitioned between IN hydrochloric acid and dichloromethane. The organic phase was separated and the aqueous phase extracted again with dichloromethane. The combined organic phases were dried (MgSC^) and concentrated under reduced pressure. The residue was chromatographed on silica gel eluting with 30 to 100% ethyl acetate in hexanes to yield the title compound (0.27 g). in NMR delta 8.39 (m, 1H), 7.65 (m, 2H), 7.28 (d, 1H), 7.01 (t, 1H), 5.68 (m, 1H), 3.96 (s, 3H), 2.62 (m, 1H), 1.79 (d, 3H), 0.64 (m, 2H), 0.52 (m, 1H), 0.35 (m, 1H).

The synthetic route of 176969-34-9 has been constantly updated, and we look forward to future research findings.

Some tips on 660845-30-7

The synthetic route of 660845-30-7 has been constantly updated, and we look forward to future research findings.

660845-30-7, name is 5-Chloro-3-(difluoromethyl)-1-methyl-1H-pyrazole-4-carbaldehyde, belongs to pyrazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Formula: C6H5ClF2N2O

In 1000 mL reaction flask, 38.9g 3- difluoromethyl-1-methyl-5-chloro-4-carbaldehyde and 390ml of water, 8.4g of sodium hydroxide was added, followed by stirring, 1g of nano copper oxide, control of the reaction temperature is 25-30 C, air through an oxidation reaction 15 hours, starting material HPLC i.e.3- difluoromethyl-1-methyl-5-chloro-4-carbaldehyde , less than the total amount of an amount of 0.2%; the reaction was stopped by filtration, recovery of copper catalyst. The reaction mixture was cooled to below 10 C, add 31% hydrochloric acid to a pH of 1-2, the precipitated solid was filtered; the solid was washed with a small amount of water; and dried to give the product 3-methyl-5-fluoro-1- chloro-pyrazole-4-carboxylic acid 40g, HPLC content 99%; LC-MS: m / e = 210.

The synthetic route of 660845-30-7 has been constantly updated, and we look forward to future research findings.